1.
“Auger and Electron-Energy-Loss Spectra from
GeS (001)," G.D. Davis
and M.G. Lagally, 23rd Natl. Symp. Am. Vacuum Soc.
(Chicago, Sept. 1976).
2.
“Measurement of Valence Band Auger Spectra
for GaAs (110) from Ga and As CCV Transitions," G.D.
Davis and M.G. Lagally, 5th Conf. Phys. Compound
Semiconductor Interfaces (Los Angeles, Jan. 1978).
3.
“Comparison of Transition Densities of States
for GeS (001) and GeSe (001) Derived from Auger and
Photoemission Spectroscopies," G.D. Davis,
P.E. Viljoen, M.G. Lagally, and J.E. Rowe, Meeting Am.
Phys. Soc. (Washington, March 1978).
4.
“Valence Band Density of States from Auger
Electron Spectroscopy," G.D. Davis, P.E.
Viljoen, and M.G. Lagally, 1st Minnesota-Wisconsin
Condensed Matter Symp. (Minneapolis, June 1978).
5.
“Photoemission Studies of Orthorhombic IV-VI
Compounds," G.D. Davis P.E. Viljoen, M.G.
Lagally, and J.E. Rowe, 11th Synchrotron Radiation
Users Conf. (Stoughton, WI, Oct. 1978).
6.
“Density of Empty States in GeSe (001) and
GeS (001)," G.D. Davis, P.E. Viljoen, M.G.
Lagally, and J.E. Rowe, 25th Natl. Symp. Am. Vacuum
Soc. (San Francisco, Nov. 1978).
7.
“Core Level Widths and Density of States in
GeS and GeSe using XPS and Deconvolution
Techniques," G.D. Davis, P.E. Viljoen, and
M.G. Lagally, Meeting Am. Phys. Soc. (Chicago, March
1979).
8.
“Photoemission Studies of Orthorhombic
Compounds using Synchrotron Radiation," G.D.
Davis, I.T. McGovern, M.G. Lagally, and J.E.
Rowe, Meeting Am. Phys. Soc. (Chicago, March 1979).
9.
“Hot Electron Loss Function by Core
Photoemission and Reflection Electron Loss
Spectroscopies," G.D. Davis, K.D. Childs, I.T.
McGovern, and M.G. Lagally, 12th Synchrotron
Radiation Center Users Meeting (Stoughton, WI, Oct.
1979).
10.
“Local Valence Band Densities of States using
Auger Electron Spectroscopy," G.D. Davis,
IBM Watson Research Center (Yorktown Heights, NY, Jan.
1980).
11.
“Local Valence Band Density of States of
Compound Semiconductors using Auger Electron
Spectroscopy," G.D. Davis, Martin Marietta
Laboratories (Baltimore, March 1980).
12.
“Valence Band Densities of States of Compound
Semiconductors by Auger and X-ray Photoelectron
Spectroscopies," G.D. Davis, Case-Western
Reserve University (Cleveland, April 1980).
13.
“Correction for loss effects in valence band
photoemission spectra by deconvolution," G.D.
Davis, K.D. Child, I.T. McGovern, and M.G. Lagally,
27th Natl. Symp. Am. Vacuum Soc. (Detroit, Oct. 1980).
14.
“Site-specific densities of states for
cleaved and sputtered GaAs (110) from Auger line
shapes," G.D. Davis, D.E. Savage, and M.G.
Lagally, 27th Natl. Symp. Am. Vacuum Soc. (Detroit,
Oct. 1980).
15.
“Properties of passivant films on HgCdTe--Interaction
with the substrate," G.D. Davis, T.S. Sun,
S.P. Buchner, and N.E. Byer, Current Technology
Issues, Soc. Photo-optical Instrumentation Engineers
Symp. East (Washington, April 1981).
16.
“Properties of passivant films on HgCdTe--Interaction
with the substrate," G.D. Davis, T.S. Sun,
S.P. Buchner, and N.E. Byer, Infrared Detector
Materials, Soc. Photo-optical Instrumentation
Engineers Symp. East (Washington, April 1981).
17.
“Correlation of surface chemistry and
mechanical properties of aluminum substrates bonded to
polymer coatings:
I. Surface chemistry," T.S. Sun, G.D.
Davis, B.M. Ditchek, J.S. Ahearn, and J.D.
Venables, Symp. Adhesion Aspects Polymer Coatings
(Minneapolis, May 1981).
18.
“The hydration of phosphoric acid anodized
aluminum surfaces:
A surface phase diagram determined by XPS,"
T.S. Sun, G.D. Davis, J.S. Ahearn, and J.D.
Venables, 3rd Symp. Appl. Surf. Anal. (Dayton, OH,
June 1981).
19.
“Passivation studies of HgCdTe," S.P.
Buchner, G.D. Davis, J. Liou, and N.E. Byer, IRIS
Specialty Group Infrared Detectors (Syracuse, NY, June
1981).
20.
“The chemistry of passivated Hg0.8Cd0.2Te
as determined by XPS," G.D. Davis, S.
Buchner, and N.E. Byer, 1st US Workshop Phys. Chem.
Mercury Cadmium Telluride (Minneapolis, Oct. 1981).
21.
“Mechanism of anodic oxidation of Hg0.8Cd0.2Te,"
J.S. Ahearn, G.D. Davis, and N.E. Byer, 28th
Natl. Symp. Am. Vacuum Soc. (Anaheim, CA, Nov. 1981).
22.
“Photochemical oxidation of Hg0.8Cd0.2Te."
G.D. Davis, S. Buchner, and N.E. Byer, 9th
Conf. Phys. Chem. Semiconductor Interfaces (Asilomar,
CA, Jan. 1982).
23.
“Surface science--Introduction and selected
applications," G.D. Davis, Old Dominion
University (Norfolk, Feb. 1982).
24.
“The effect of solutionizing temperature on
film and grain boundary composition and
stress-corrosion-cracking in Al-Zn-Mg Alloys," J.R.
Pickens, D. Venables, M.K. Morgenthaler, and G.D.
Davis, Conf. Natl. Assoc. Corrosion Engineers
(Houston, March 1982).
25.
“Species-specific density of states of Ga and
As in the oxidation of GaAs (110)," K.D.
Childs, G.D. Davis, and M.G Lagally, Meeting Am.
Phys. Soc. (Dallas, March 1982).
26.
“Use of surface behavior diagrams to compare
anodic and photochemical oxides of Hg0.8Cd0.2Te,"
G.D. Davis, S.P. Buchner, W.A. Beck, and N.E.
Byer, 4th Symp. Appl. Surf. Anal. (Dayton, OH, June
1982).
27.
“Study of chromic-acid-anodized titanium
oxide using Auger line
shapes" G.D. Davis, M. Natan, and K.A.
Anderson, 4th Symp. Appl. Surf. Anal. (Dayton, OH,
June 1982).
28.
“Use of surface behavior diagrams to study
adhesive bond durability," G.D. Davis and
J.D. Venables, 56th Colloid and Surface Science Symp.
(Blacksburg, VA, June 1982).
29.
“The role of grain boundary segregation in
SCC of aluminum powder metallurgy alloys," J.R.
Pickens, L. Christodoulou, J.R. Gordon, and G.D.
Davis, Lockheed California (Burbank, CA, Oct. 1982).
30.
“Grain boundary segregation as related to
stress-corrosion-cracking of Al-Zn-Mg alloys," J.R.
Pickens, L. Christodoulou, G.D. Davis, and J.A.S.
Green, The Metallurgical Soc., Am. Inst. Metallurgical
Engineers, Meeting (St. Louis, Oct. 1982).
31.
“Photochemical oxidation of Hg1-xCdxTe,"
S.P. Buchner, G.D. Davis, and N.E. Byer,
presented at 29th Natl. Symp. Am. Vacuum Soc.
(Baltimore, Nov. 1982).
32.
“Use of surface behavior diagrams to study
surface reactions," G.D. Davis, Northeast
ESCA Users Group Meeting XXIII, (Silver Spring, MD,
Dec. 1982).
33.
“x-value dependence of the properties of the
anodic oxide of Hg1-xCdxTe,"
S.P. Buchner, G.D. Davis, J.S. Ahearn, and N.E.
Byer, 10th Conf. Phys. Chem. Semiconductor Interfaces
(Santa Fe, NM, Jan. 1983).
34.
“Interaction of thin layers of Al and Ge with
cleaved (Hg,Cd)Te surfaces," G.D. Davis,
N.E. Byer, R.R. Daniels, and G. Margaritondo, 2nd US
Workshop Phys. Chem. Mercury Cadmium Telluride
(Dallas, Feb. 1983).
35.
“New approaches for studying moisture
sensitivity of adhesive bonds," G.D. Davis,
NAVAIR Corrosion Technology Review (Warminster, PA,
Mar. 1983).
36.
“Surface behavior diagrams to study chemical
reactions on surfaces," G.D. Davis,
University of Maryland Baltimore County (Baltimore,
April 1983).
37.
“The anodic oxide of Hg1-xCdxTe:
The composition and reaction with the
substrate," G.D. Davis, S.P. Buchner, J.S.
Ahearn, and N.E. Byer, Technical Issues in Infrared
Detectors and Arrays, Soc. Photo-optical
Instrumentation Engineers Technical Symp. East
(Arlington, VA, April 1983).
38.
“Controlled application of contaminants to
Al-alloys surfaces and effects on epoxy
adhesion," J.S. Ahearn, G.D. Davis, A.I.
Desai, L.J. Matienzo and T.K. Shah, Middle Atlantic
Regional Meeting, Am. Chem. Soc. (White Haven April
1983).
39.
“UPS characterization of extrinsic surface
states on (0001) ZnO surfaces induced by adsorption of
Fe(CN)64-
and Fe2+
from aqueous electrolytes," J.S. Ahearn,
G.D. Davis, R.C.O. Butler, and D.C. Cooke, Middle
Atlantic Regional Meeting, Am. Chem. Soc. (White
Haven, PA, April 1983).
40.
“Surface behavior diagram study of the
adhesive bonding of aluminum," G.D. Davis,
Rensselaer Polytechnic Institute (Troy, NY, April
1983).
41.
“Insulator interfaces with Hg1-xCdxTe,"
N.E. Byer, G.D. Davis, S.P. Buchner, and J.S.
Ahearn, Intl. Conf. Insulating Films on Semiconductors
(Eindhoven, The Netherlands, April 1983) (INVITED)
42.
"Surface behavior diagram study of the
adhesive bonding of aluminum," G.D. Davis,
University of Wisconsin (Madison, WI, April 1983).
43.
"Hydration of aluminum adherends as
studied by surface behavior diagrams," G.D.
Davis, J.S. Ahearn, and J.D. Venables, 15th Natl.
Soc. Advancement Materials Processing Engineering
Technical Conf. (Cincinnati, Oct. 1983).
44.
“Use of XPS surface behavior diagrams to
study hydration of aluminum oxide surfaces," G.D.
Davis, J.S. Ahearn, and J.D. Venables, 30th Natl.
Symp. Am. Vacuum Soc. (Boston, Nov. 1983).
45.
“Deposition of Au overlayers onto cleaved (Hg,Cd)Te
surfaces," G.D. Davis, N.E. Byer, R.R.
Daniels, and G. Margaritondo, 30th Natl. Symp. Am.
Vacuum Soc. (Boston, Nov. 1983).
46.
“Hydration inhibitor properties for improved
durability of aluminum adhesive bonds," G.D.
Davis, J.S. Ahearn, and J.D. Venables, Army
Research Office--Working Group Meeting on Principles
and Applications of Electrochemistry (Charleston, SC,
Dec. 1983).
47.
“Surface stoichiometry changes induced by
hydrogenation of Hg0.72Cd0.28Te,"
G.D. Davis, N.E. Byer, R.A. Riedel, R.R.
Daniels, and G. Margaritondo, 3rd US Workshop Phys.
Chem. Mercury Cadmium Telluride (San Diego, May 1984).
48.
“The interaction of cleaved (HgCd)Te surfaces
with deposited metal overlayers," G.D. Davis,
Texas Instruments Corporate Research Center (Dallas,
June 1984).
49.
“The protection of SAA surfaces with organic
corrosion inhibitors," D.K. Shaffer, L.J.
Matienzo, and G.D. Davis, NADC Corrosion Technology
Review (Warminister, PA, Aug. 1984).
50.
“Surface behavior diagrams:
XPS characterization of metal oxides," G.D.
Davis, Gordon Research Conf. on Adhesion Science
(New Hampton, NH, Aug. 1984). (INVITED)
51.
“Study of adhesive bond durability using XPS
surface behavior diagrams," G.D. Davis,
University of Warwick (Coventry, England, Sept. 1984).
52.
“Hydration inhibitor properties for improved
durability of aluminum adhesive bonds," G.D.
Davis, J.S. Ahearn, and J.D. Venables, Int.
Adhesion Conf. 1984 (Nottingham, England, Sept. 1984)
(INVITED)
53.
“Interaction of thin metal overlayers with
the Hg0.72Cd0.28Te
surface," G.D. Davis, Fraunhofer-Institut
fur Angewandte Festkorperphysik (Freiberg, FRG, Sept.
1984).
54.
“Protection of SAA surfaces with organic
corrosion inhibitors," D.K. Shaffer, L.J.
Matienzo, and G.D. Davis, Naval Air Sys. Command 6.1
Review (Washington DC, Sept. 1984).
55.
“Surface behavior diagrams applied to
adhesive bonding," G.D. Davis, 2nd Symp.
Welding, Bonding, and Fastening (Hampton, VA, Oct.
1984).
56.
“Deposition of Al and In overlayers onto
cleaved (HgCd)Te surfaces," G.D. Davis,
N.E. Byer, R.A. Riedel, and G. Margaritondo, 31st
Natl. Symp. Am. Vacuum Soc. (Reno, NV, Dec. 1984).
57.
“Adsorption of amino phosphonates onto
anodized aluminum surfaces and their use in improving
adhesion properties," G.D. Davis, D.K.
Shaffer, L.J. Matienzo, and J.S. Ahearn, 31st Natl.
Symp. Am. Vacuum Soc. (Reno, NV, Dec. 1984).
58.
“Environmental durability of
phosphoric-acid-anodized aluminum adhesive joints
protected with hydration inhibitors," J.S.
Ahearn and G.D. Davis, Adhesion Soc. Meeting
(Savannah, GA, Feb. 1985).
59.
“Surface characterization of
sulfuric-acid-anodized (SAA) aluminum treated with
corrosion inhibitors," L.J. Matienzo, D.K.
Shaffer, and G.D. Davis, 35th Pittsburgh Conf.
Exposition Analytical Chem. and Applied Spectroscopy
(New Orleans, Feb. 1985).
60.
“Use of surface behavior diagrams to
determine hydration inhibitor properties for improved
durability of aluminum adhesive bonds," G.D.
Davis, J.S. Ahearn, and J.D. Venables, 114th
Meeting, The Metallurgical Soc., Am. Inst.
Metallurgical Engineers (New York, Feb. 1985).
61.
“Use of surface behavior diagrams to analyze
XPS measurements," G.D. Davis, 1st
Physical Electronics ESCA Users Conf. (Oconomowoc, WI,
April 1985).
62.
“The effects of impurities on the reaction of
Ta and Si multilayers processed by rapid thermal
annealing," G.D. Davis, M. Natan, and K.A.
Anderson, Tri-State Symp. Surface Analysis and Thin
Film Technology (Oconomowoc, WI, May 1985).
63.
“Adhesive bonding of aluminum," G.D.
Davis, 7th Symp. Appl. Surf. Anal. (College Park,
MD, May 1985). (INVITED)
64.
“The use of surface behavior diagrams to
investigate surface and interfacial phenomena," G.D.
Davis, Maryland Institute of Metals (Baltimore,
Oct. 1985). (INVITED)
65.
“Improvements of adhesive bond durability
using hydration inhibitors," G.D. Davis,
European Conf. Appl. Surf. and Interfacial Anal. (Veldhoven,
The Netherlands, Oct. 1985). (INVITED)
66.
“Surface analysis," G.D. Davis,
lecture for Industrial Instrumental Analysis, Virginia
Polytechnic Institute and State University
(Blacksburg, VA, Oct. 1985). (INVITED)
67.
“Deposition of thin Al and Au overlayers onto
sputtered (HgCd)Te surfaces," G.D. Davis,
W.A. Beck, E. Colavita, M.K. Kelly, D.W. Niles, N.
Tache, and G. Margaritondo, 32rd Natl. Symp. Am.
Vacuum Soc. (Houston, Nov. 1985).
68.
“Interactions of metals with Hg1-xCdxTe,"
G.D. Davis, Martin Marietta Laboratories
(Baltimore, MD, March 1986).
69.
“Surface behavior diagrams and their role in
predicting corrosion and adhesion behavior," G.D.
Davis, J.S. Ahearn, and W.C. Moshier, Corrosion
Prevention and Control Conf. (Williamsburg, VA, April
1986). (INVITED).
70.
“Influence of molybdenum additions on the
pitting corrosion of aluminum films," W.C.
Moshier, G.D. Davis, J.S. Ahearn, and H.F. Hough,
Corrosion Prevention and Control Conf. (Williamsburg,
VA, April 1986). (INVITED).
71.
“Aluminum corrosion and passivation studied
by surface behavior diagrams," G.D. Davis,
W.C. Moshier, and J.S. Ahearn, 1986 Spring Symp.
Eastern Electron Spectroscopy Soc. (Columbia, MD, May
1986).
72.
“Surface science at Martin Marietta
Laboratories," G.D. Davis, Greater
Washington Surface Science Colloquium (Silver Spring,
MD, May 1986).
73.
“Corrosion of aluminum in dilute sulfate
solutions studied by surface behavior diagrams," G.D.
Davis, W.C. Moshier, and J.S. Ahearn, 8th Symp.
Appl. Surf. Anal. (Dayton, OH, June 1986).
74.
“Reduction of charging effects in Auger
spectra," K.A. Olver and G.D. Davis, 1986
PHI Users' Meeting (Hagarstown, MD, Sept. 1986).
75.
“Surface science at Martin Marietta
Laboratories," G.D. Davis, Martin Marietta
Corporation Surface Science Workshop (Baltimore, MD,
Sept. 1986).
76.
“Effect of surface preparation on
interactions of thin Cu overlayers on (HgCd)Te," G.D.
Davis, W.A. Beck, M.K. Kelly, N. Tache, and G.
Margaritondo, 1986 Synchrotron Radiation Center Users
Group Meeting (Stoughton, WI, Oct. 1986).
77.
“Growth of Ge overlayers onto (HgCd)Te:
A comparison between cleaved and ion-sputtered
surfaces," G.D. Davis, W.A. Beck, M.K.
Kelly, Y.W. Mo, G.
Margaritondo, 33rd Natl. Symp. Am. Vacuum Soc.,
10th Int. Vacuum Congr., 6th Int. Conf. Solid Surfaces
(Baltimore, MD, Oct. 1986).
78.
“Corrosion/passivation of aluminum in dilute
sulfate solutions: A comparison of Pourbaix and
surface behavior diagrams," G.D. Davis,
W.C. Moshier, and J.S. Ahearn, 33rd Natl. Symp. Am.
Vacuum Soc., 10th Int. Vacuum Congr., 6th Int. Conf.
Solid Surfaces (Baltimore, MD, Oct. 1986).
79.
“Sample grounding or isolation," G.D.
Davis, ASTM Workshop on Charge Compensation
Methods in Surface Analysis (Baltimore, MD, Oct.
1986).
80.
“Contact formation to (HgCd)Te," W.A.
Beck and G.D. Davis, ARO Workshop on
Prospects for Research on Semiconductor Material
Surfaces (Research Triangle Park, NC, Nov. 1986).
(INVITED)
81.
“Effects of molybdenum and chromium additions
on the corrosion behavior of aluminum in chloride
solutions," W.C. Moshier, G.D. Davis, and
J.S. Ahearn, Corrosion 87:
Conf. Natl. Assoc. Corrosion Engineers (San
Francisco, CA, March 1987).
82.
“New approaches to failure analysis using XPS
sputter depth profiles," G.D. Davis, H.M.
Clearfield, W.C Moshier, and G.O. Cote, 9th Symp. Appl.
Surf. Anal. (Dayton, OH, June 1987).
83.
“Corrosion of aluminum as studied by surface
behavior diagrams," G.D. Davis, Martin
Marietta Laboratories (Baltimore, MD, June 1987).
84.
“Interfacial reactions between (HgCd)Te and
intermediate reactivity overlayers," G.D.
Davis, W.A. Beck, M.K. Kelly, D. Kilday, Y.W. Mo,
N. Tache, and G. Margaritondo, 1987 US Workshop Phys.
Chem. Mercury Cadmium Telluride (New Orleans, LA, Oct.
1987).
85.
“Metallic adherend surface
preparations," G.D. Davis, lecture for
”Fundamentals of Adhesion:
Theory, Practice and Applications"
short course for State University of New York
at New Paltz (West Point, NY, Oct. 1987). (INVITED)
86.
“Overlayer interactions with (HgCd)Te," G.D.
Davis, 34th Natl. Symp. Am. Vacuum Soc. (Anaheim,
CA, Nov. 1987). (INVITED)
87.
“Moisture-resistant low-temperature-curing
adhesives," C.O. Arah, J.S. Ahearn, J.M.
Vogin, D.K. Shaffer, D.K. McNamara, A.L. Berrier, and
G.D. Davis, 5th Int. Sym. Structural Adhesive Bonding
(Dover, NJ, Nov. 1987).
88.
“Use of XPS sputter-depth profiles in failure
analysis," H.M. Clearfield, G.D. Davis,
G.O. Cote, and D.K. Shaffer, 1988 Spring Meeting
Eastern Electron
Spectroscopy Society (Baltimore, MD, April, 1988).
89.
“Inhibition of pitting corrosion on aluminum
with molybdenum-alloy and
molybdate-electrolyte additions," G.D.
Davis, W.C. Moshier, and G.O. Cote, 10th Sym. Appl.
Surf. Anal. (Denver, CO, April 1988).
90.
“Formation of pitting-resistant passive films
on Al by alloying additions," W.C. Moshier,
G.D. Davis, T.L. Fritz, and G.O. Cote, 173rd Meeting
Electrochemical Soc. (Atlanta, GA, May 1988).
91.
“Interaction of molybdate anions and the
passive film on Al exposed to chloride-containing
solutions," W.C. Moshier, G.D. Davis, and
G.O. Cote, 173rd Meeting Electrochemical Soc.
(Atlanta, GA, May 1988).
92.
“Influence of Alloying Additions on the
Passivity of Sputter-Deposited Aluminum Alloys,"
W.C. Moshier and G.D. Davis, Gordon Research
Conference on Corrosion (New London, NH, July 1988)
(INVITED).
93.
“Exposure Study to Determine Effects of Acid
Deposition on Painted Steel Substrates," G.D.
Davis, W.C. Moshier, C.O. Arah, P.J. Moran, T.
Simpson, and K.L. Zankel, Gordon Research Conference
on the Science of Adhesion (New Hampton, NH, August
1988).
94.
“Effects of Thin Interlayers on Ag/(HgCd)Te
Interface Behavior," G.D. Davis, W.A.
Beck, D.G. Kilday, J.T. McKinley, and G. Margaritondo,
35th Natl. Symp. Am. Vacuum Soc. (Atlanta, Oct. 1988).
95.
“Metallic adherend surface
preparations," G.D. Davis, lecture for
”Fundamentals of Adhesion:
Theory, Practice and Applications"
short course for State University of New York
at New Paltz (West Point, NY, Oct. 1988). (INVITED)
96.
“Influence of Alloying Additions on the
Passivity of Aluminum," W.C. Moshier and
G.D. Davis, Johns Hopkins University (Baltimore, Nov.
1988).
97.
“Performance of Alkyd Coatings in Acidic
Environments Under Accelerated Conditions," C.O.
Arah, G.D. Davis, W.C. Moshier, P.J. Moran, T.C.
Simpson, and K.L. Zankel, 39th Annual Meeting Steel
Structures Painting Council (Baltimore, Nov. 1988).
98.
“Preliminary Exposure Study to Determine the
Effects of Acid Deposition on Coated Steel
Substrates," P.J. Moran, C.O. Arah,
G.D. Davis, and T.C. Simpson, Materials
and Cultural Resources Effects Task Group VII Peer
Review (Charleston, SC, Jan. 1989).
99.
“Use of Surface Analytical Techniques for
Failure Analysis in Research and Production
Environments," G.D. Davis, T.K. Shah, and
H.M. Clearfield, 12th Annual Adhesion Society Meeting
(Hilton Head Island, SC, Feb. 1989.
100.
“Acid Deposition on Painted Steel," G.D.
Davis, Martin Marietta Laboratories (Baltimore,
MD, March 1989).
101.
“Metallic Adherend Surface Treatments," G.D.
Davis, lecture for ”Surface Modification to
Improve Adhesion and Control Corrosion" short
course for Center for Adhesives, Sealants, and
Coatings of Case Western Reserve University
(Cleveland, OH, May 1989). (INVITED)
102.
“An In-situ Electrochemical Monitor for
Detection of Paint Degradation in Atmospheric
Exposure," T.C. Simpson, P.J. Moran, W.C.
Moshier, G.Davis, C.O. Arah, and K.L. Zankel, 1st Int.
Symp. on Electrochemical Impedance Spectroscopy (Bombannes,
France, May 1989).
103.
“Effects of SO2 Deposition on Painted Steel
Surfaces," G.D. Davis, B.A. Shaw, C.O.
Arah, W.C. Moshier, T.C. Simpson, P.J. Moran, and K.L.
Zankel, 11th Symp. Appl. Surf. Anal. (Cleveland, OH,
June 1989).
104.
“XPS characterization of dentin and dentin
treated with bonding primers," V.P. Thompson, T.L.
Edler, and G.D. Davis, 1989 Meeting of Int. Assoc.
Dental Research (Dublin, Ireland, June 1989).
105.
“Aging aircraft:
New tools for structural integrity," G.D.
Davis, seminar for Federal Aviation Administration
(Washington, D.C., Oct. 1989). (INVITED)
106.
“Alloying additions for enhancing the
localized corrosion resistance of aluminum," B.A.
Shaw, G.D. Davis, T.L. Fritz, and W.C. Moshier,
176th Meeting Electrochem. Soc. (Hollywood, FL, Oct.
1989).
107.
“Metallic adherend surface preparation,"
G.D. Davis, lecture for ”Fundamentals of
Adhesion: Theory,
Practice and Applications"
short course for State University of New York
at New Paltz (Pearl River NY, Oct. 1989). (INVITED)
108.
“Corrosion behavior of aluminum pretreated in
molybdate solutions," G.D. Davis and B.A.
Shaw, 36th Nat. Symp. Amer. Vacuum Soc. (Boston, Oct.
1989).
109.
“Adhesive Bonding of Aerospace
Structures," G.D. Davis, Science Council
Seminar, Martin Marietta Laboratories (Baltimore, MD,
Oct. 1989).
110.
“NASA SPIP Bondline Work Package Critical
Processing Parameters Assessment," N. Otto,
F. Davidson, R. Synder, K. Bills, G. Davis, A.
Gilbert, and L. Poulter,
1989 Joint JANNAF Composite Motor Case and
Structures and Mechanical Behavior Subcommittees
Meeting (Pasadena, CA, Nov. 1989).
111.
“Electrochemical Impedance Measurements for
Evaluating and Predicting the Performance of Organic
Coatings for Atmospheric Exposure," T.C.
Simpson, P.J. Moran, H. Hampel, G.D. Davis, B.A.
Shaw, C.O. Arah, T.L. Fritz, K.L. Zankel, ASTM Silver
Anniversary Symp. on Corrosion Testing and Evaluation
(Orlando, FL, Nov. 1989).
112.
“Alloying Additions for Enhancing the
Localized Corrosion Resistance of Aluminum,"
B.A. Shaw, G.D. Davis, T.L. Fritz, K.A.
Olver, and W.C. Moshier, Symp. on Practical
Applications of Electrochemical Corrosion Techniques
(Baltimore, MD, Dec. 1989).
113.
“Surface Characterization of
Substrates," G.D. Davis, Science and
Technology of Adhesives, short course for State
University of New York at New Paltz (Tokyo, Japan,
Jan. 1990). (INVITED)
114.
“Metallic Adherend Surface Treatment of
Aerospace Structures," G.D. Davis, Science
and Technology of Adhesives, short course for State
University of New York at New Paltz (Tokyo, Japan,
Jan. 1990). (INVITED)
115.
“Surface Treatments of Aluminum and Titanium:
From Basic Research to Production Failure
Analysis," G.D. Davis, Intl. Conf. on
Adhesion and Surface Analysis (Loughborough, UK, April
1990). (INVITED).
116.
“Adhesive Bonding and Corrosion:
Basic Principles and Applications to Aging
Aircraft," G.D. Davis, short course for
Martin Marietta Canada and the Canadian Automated Air
Traffic Control System (Ottawa, Canada, July 1990).
(INVITED).
117.
“Surface Analysis and Adhesives for Bonding
to Dentin/Bone," V.P. Thompson and G.D.
Davis, Gordon Research Conference on the Science of
Adhesion (New Hampton, NH, August 1990). (INVITED).
118.
“Passivity Enhancement of Aluminum with
Tungsten Alloying Additions," G.D. Davis,
T.L. Fritz, K.A. Olver, B.J. Rees, B.A. Shaw, and W.C.
Moshier, 178th Meeting Electrochem. Soc. (Seattle, WA,
October 1990).
119.
“The Influence of Non-Equilibrium Alloying
Additions on Aluminum Passivity," B.A. Shaw,
G.D. Davis, B.J. Rees, and W.C. Moshier, 1991 NACE
Research in Progress Symp., Corrosion91 (Cincinnati,
OH, March 1991).
120.
“Passive Film Chemistry of Non-Equilibrium
Aluminum Alloys," G.D. Davis, B.A. Shaw,
and W.C. Moshier, 1991 NACE Research in Progress Symp.,
Corrosion91 (Cincinnati, OH, March 1991).
121.
“Surface Characterization:
Why and How?" G.D. Davis,
Ballistics Laboratory, (Aberdeen Proving Ground, MD,
April 1991).
122.
“In-Process Monitoring of Solid Rocket
Motors," G.D. Davis, Martin
Marietta Laboratories, (Baltimore, MD, May
1991).
123.
Process
Control Techniques:
Experimental Evaluation of Candidate Materials
for Monitoring Contamination, Thickness/Coverage, and
Degree of Cure," G.D. Davis, R.L. Gause, T.F.
Davidson, and M. Rooney, 3rd Conf.
Nondestructive Evaluation for Aerospace Requirements,
(Huntsville, AL, June 1991).
124.
“Enhancing the Localized Corrosion Resistance
of Aluminum Through Nonequilibrium Alloying," B.A.
Shaw, G.D. Davis, B.J. Rees, and W.C. Moshier,
180th Meeting Electrochem. Soc. (Phoenix, AZ, October
1991).
125.
“The Chemistry and Structure of
Nonequilibrium Aluminum Alloy Passive Films," G.D.
Davis, W.C. Moshier, B.A. Shaw, G.G. Long, and
D.R. Black, 180th Meeting Electrochem. Soc. (Phoenix,
AZ, October 1991).
126.
“Surface Characterization:
Why and How?" G.D. Davis,
University of Maryland, Baltimore County, (Baltimore,
MD, October 1991).
127.
“Contamination Sensitivity
and Monitoring for SRM Bondlines," G.D.
Davis, T.F. Davidson, D. Johns, L.L. Kolonko, W.
Nikolai, R.L. Gause, and R.C. Schirato, JANNAF
Propulsion Subcommittee Meeting (Indianapolis, IN,
February 1992).
128.
“Surface Contamination:
Effect on Adhesion," G.D. Davis,
Virginia Tech Center for Adhesive and Sealant Science
and Center for Composite Materials and Structures
Program Review (Blacksburg, VA, March 1992). (INVITED)
129.
“Contamination of Surfaces:
Origin, Detection, and Effect on
Adhesion," G.D. Davis, 2nd Intl. Conf. on
Adhesion and Surface Analysis (Loughborough, UK, April
1992). (INVITED).
130.
“Enhancing Passivity in Light Weight Metals
Through Nonequilibrium Alloying," B.A. Shaw,
M. Ferry, T. Schrecengost, G.D. Davis, B.J. Rees, W.C.
Moshier, and R. Wendt, 1992 NACE Research in Progress
Symp., Corrosion92 (Nashville, TN, March 1992).
(INVITED).
131.
“Surface Spectroscopies in Adhesion," G.D.
Davis, ONR/NRL Workshop on Adhesion and
Intermolecular Forces (Alexandria, VA, June 1992).
(INVITED).
132.
“Passivity in Nonequilibrium alloys," B.A.
Shaw, T.R. Schrecengost, P.L. Miller, E.L.
Principe, W.C. Moshier, R.C. Wendt, G.D. Davis, and
B.J. Rees, Gordon Research Conference on Corrosion
(New London, NH, July 1992). (INVITED).
133.
“Passivity of Supersaturated Aluminum
Alloys," G.D.
Davis, B.A. Shaw, B.J. Rees, and E.L. Principe,
Eastern Electron Spectroscopy Society (Silver Spring,
MD, October 1992).
134.
“Passivity of Super-Saturated Al-W
Alloys" G.D. Davis, B.A. Shaw, B.J. Rees,
M. Ferry, and E.L. Principe, 39th Nat. Symp. Amer.
Vacuum Soc. (Chicago, November 1992).
135.
“Process Control Methodology:
Process Sensitivity Evaluation of the
Case-to-Insulation Bondline," G.D. Davis
and L.L. Kolonko, JANNAF Structures and Mechanical
Behavior Subcommittee Meeting (Albuquerque, NM,
November 1992).
136.
“Why is Stainless Aluminum Stainless?" G.D.Davis,
Martin Marietta Laboratories (Baltimore, MD, November
1992).
137.
“Nonlinear Plate Analysis of Thin Film
Blistering," K.M. Liechti, A. Shirani, G.D.
Davis, and B.J. Rees, Int. Symp. Interphase
(Williamsburg, VA, February, 1993).
138.
“Passivity Enhancement in Nonequilibrium
Aluminum Alloys," E.L. Principe, B.A. Shaw,
G.D. Davis, B.J. Rees, W.C. Moshier, and R.G. Wendt
1993 NACE Research in Progress Symp., Corrosion93 (New
Orleans, LA, March 1993). (INVITED).
139.
“Metal-Polymer Interphases in Structural
Adhesive Joints," G.D. Davis, Mater. Res.
Soc. Spring Meeting, (San Francisco, CA, April 1993).
(INVITED).
140.
“Passivity Enhanced Nonequilibrium Aluminum
Alloys," B.A. Shaw, E.L. Principe, G.D.
Davis, B.J. Rees, W.C. Moshier, and R.G. Wendt, 183rd
Meeting Electrochem. Soc. (Honolulu, HI, May 1993).
141.
“Nonequilibrium Al Alloys:
Effects on Passivity in Chloride
Environments," E.L. Principe, B.A. Shaw,
G.D. Davis, and H.M Meyer, III, 12th Int. Corrosion
Congr. (Houston, TX, September 1993).
142.
“Chemical Evaluation of Cu-Polyimide
Interfaces," G.D. Davis, B.J. Rees, and
P.L. Whisnant, 40th Nat. Symp. Amer. Vacuum Soc.
(Orlando, FL, November 1993).
143.
“Chemical and Mechanical Analysis of Cu-Polyimide
Interfaces,” G.D. Davis, B.J. Rees, P.L.
Whisnant, K.M. Liechti, and A. Shirani, 17th Annual
Meeting Adhes. Soc. (Orlando, FL, February
1994)
144.
“Plasma Sprayed Coatings as Surface
Treatments of Aluminum Adherends,” G.D. Davis,
D.K. Shaffer, P.L. Whisnant, G.B. Groff, and J.D.
Venables, 3rd Intl. Conf. on Adhesion and Surface
Analysis (Loughborough, UK, April 1994).
145.
“Plasma Sprayed Coatings as Surface
Treatments of Aluminum and Titanium Adherends,” G.D.
Davis, D.K. Shaffer, P.L. Whisnant, G.B. Groff,
and J.D. Venables, 41st Nat. Symp. Amer. Vacuum Soc.
(Denver, CO, October 1994).
146.
"Bondline Contamination Studies:
An Overview,” G.D. Davis, T.F.
Davidson, and R.L. Gause, 1994 JANNAF Nondestructive
Evaluation and Structures and Mechanical Behavior
Meeting, (Ogden,
UT, October 1994).
147.
“Bondable
Stainless Surface (BOSS) Coatings for Steel Cases,” G.D.
Davis, G.B. Groff, L.L. Biegert, and H. Heaton,
1994 JANNAF Nondestructive Evaluation and Structures
and Mechanical Behavior Meeting,
(Ogden, UT, October 1994).
148.
“Detection of Subadhesive Hydration of
Aluminum Adherends by Electrochemical Impedance
Spectroscopy,” G.D. Davis, P.L. Whisnant, and
J.D. Venables, 18th Annual Meeting Adhes. Soc.,
(Hilton Head Island, SC, February 1995),
149.
“Plasma Sprayed Bondable Stainless Surface
(BOSS) Coatings for Corrosion Protection and Adhesion
Treatments,” G.D. Davis, G.B. Groff, M.
Rooney, A.V. Cooke, and R. Boothe, Environmentally
Compliant Coatings Applications and Removal Techniques
Technical Interchange Meeting (Huntsville, AL, March
1995).
150.
“Plasma Sprayed Bondable Stainless Surface
(BOSS) Coatings for Corrosion Protection and Adhesion
Treatments,” G.D. Davis, G.B. Groff, M.
Rooney, A.V. Cooke, and R. Boothe, 1995 JANNAF Safety
and Environmental Protection Subcommittee Workshop on
Environmentally Sound Processing Technology,
(San Diego, CA, July 1995).
151.
“Use of Electrochemical Impedance
Spectroscopy to Monitor Adhesive Bond Integrity, G.D.
Davis, P.L. Whisnant, and J.D. Venables, 42nd
Nat. Symp. Amer. Vacuum Soc. (Minneapolis, MN, October
1995).
152.
“The Use of Electrochemistry and Ellipsometry
for Identifying and Evaluating Corrosion on
Aircraft,” B.C. Taggart, C.M. Dacres, G.D.
Davis, P.L. Whisnant, and C.R. Anderson, 1995 Intl.
Mechanical Engineering Congr. and Exposition, (San
Francisco, CA, November 1995).
153.
“Plasma
Sprayed Bondable Stainless Surface (BOSS) Coatings for
Solid Rocket Motors,” G.D. Davis, A.V. Cooke,
M. Rooney, G.B. Groff, R. Boothe, C. Simmons, T.R.
Swauger, and P. Graham, 1995 JANNAF Propulsion and
Subcommittee Joint Meetings Technology,
(Tampa, FL, December 1995).
154.
“Use of Plasma Sprayed Coatings as Surface
Treatments for Aluminum Adherends,” G.D. Davis,
B.S. Wenner, P.L. Whisnant, G.B. Groff, and J.D.
Venables, 19th Annual Meeting Adhes. Soc.,
(Myrtle Beach, SC, February 1996).
155.
“Use of Plasma Sprayed Coatings as Surface
Treatments of Aluminum and Titanium Adherends,” G.D.
Davis, B.S. Wenner, P.L. Whisnant, G.B. Groff, and
J.D. Venables, 41st Inter. SAMPE Symp.
(Anaheim, CA, March 1996).
156.
“Monitoring Adhesive Bond and Coating
Integrity with Electrochemical Impedance
Spectroscopy,” G.D. Davis, C.M. Dacres, B.C.
Taggart, B.S. Wenner, and P.L. Whisnant,
41st Inter. SAMPE Symp.
(Anaheim, CA, March 1996).
157.
“Monitoring Adhesive Bond and Coating
Integrity with Electrochemical Impedance
Spectroscopy,” G.D. Davis, C.M. Dacres, B.C.
Taggart, B.S. Wenner, and P.L. Whisnant, 4th
Inter. Conf. on Adhesion and Surface Analysis, (Loughborough,
UK, April 1996).
158.
“X-ray Photoelectron Spectroscopy, Auger
Electron Spectroscopy, and Secondary Ion Mass
Spectrometry,” G.D. Davis, ASM Inter.
Educational Symp. (Oak Ridge, TN, April 1996)
(INVITED).
159.
“Development of an Electrochemical Sensor to
Detect Corrosion of Aging Aircraft,” G.D. Davis,
C.M. Dacres, B.C. Taggart, B.S. Wenner, and M. Shook,
AeroMat’96: 7th
Annual Advanced Aerospace Materials and Processes
Conf. & Exposition, (Dayton, OH, June 1996).
160.
“Plasma Sprayed Treatments for Aluminum and
Titanium Adherends,” G.D. Davis, B.S. Wenner,
G.B. Groff, and R. Zatorski, AeroMat’96:
7th Annual Advanced Aerospace
Materials and Processes Conf. & Exposition,
(Dayton, OH, June 1996).
161.
“Development of an Electrochemical Sensor to
Detect Corrosion of Aging Aircraft,” C.M. Dacres,
G.D. Davis, B.C. Taggart, B.S. Wenner, and M. Shook,
AeroMat’96: Air
Force 4th Aging Aircraft Conf., (Colorado
Springs, CO, July 1996).
162.
“Monitoring Coating and Bondline Integrity
with an In-Situ Corrosion Sensor,” G.D. Davis,
Gordon Research Conference on the Science of Adhesion
(Tilton, NH, August 1996) (INVITED).
163.
“Use of Plasma Sprayed Coatings as Surface
Treatments for Aluminum Adherends,” G.D. Davis,
B.S. Wenner, G. B. Groff, and R.A. Zatorski,
Annual Joint Service Pollution Prevention Conf.
(San Antonio, TX, August 1996).
164.
“Electrochemical Sensors for Evaluating
Corrosion and Adhesion on Painted Metal Structures,”
G.D. Davis, Ford Motor Company (Dearborn, MI,
October 1996). (INVITED).
165.
“Plasma Sprayed Coatings as Treatments for
Aluminum, Titanium, and Steel Adherends,” G.D.
Davis, 43rd Nat. Symp. Amer. Vacuum
Soc. (Philadelphia, PA, October 1996). (INVITED).
166.
“Thermal Spraying of Aluminum as an Adhesive
Bond Pretreatment,” G.D. Davis, TMS Annual
Meeting (Orlando, FL, February 1997).
167.
“Making It Last After Making It Stick,” J.D.
Venables and G.D. Davis,
in 20th Annual Meeting Adhes.
Soc.,
(Hilton Head Island, SC, February 1997). (INVITED).
168.
“Effect of Plasma Polymerized Primers on the
Durability of Aluminum/Epoxy Adhesive Bonds,” R.H.
Turner, I. Segall, F.J. Boerio, and G.D. Davis, in
20th Annual Meeting Adhes.
Soc.,
(Hilton Head Island, SC, February 1997).
169.
“Thermal Spray Coatings as Durable Surface
Treatments for Aluminum, Titanium, and Steel Adherends,”
G.D. Davis, Adhesive and Sealant Council Twin
Cities Regional Meeting (Brooklyn Park, MN, May 1997).
(INVITED).
170.
“Electrochemical Sensors for Evaluating
Corrosion and Adhesion on Painted Metal Structures,”
G.D. Davis, 3M Corporation (Minneapolis, MN,
May 1997). (INVITED).
171.
“Electrochemical Sensors for Evaluating
Corrosion and Adhesion on Polymer/Metal Structures,”
G.D. Davis, C.M. Dacres, M. Shook, and B.S.
Wenner, 4th Internat. Conf. Composites
Engineering, ICCE/4,
(Kohala Coast, Hawaii, July 1997).
172.
“Electrochemical In-Situ
Sensors for Detecting Corrosion on Aging
Aircraft,” G.D. Davis, C.M. Dacres, M. Shook,
and B.S. Wenner,
Workshop on Intelligent NDE Sciences for Aging and
Futuristic Aircraft
(El Paso, TX, October 1997).
173.
“Electrochemical Impedance Spectroscopy-Based
Sensor to Detect Corrosion Under Paint Coatings,” G.D.
Davis, C.M. Dacres, and M. Shook, 44th
Nat. Symp. Amer. Vacuum Soc. (San Jose, CA, October
1997).
174.
“Electrochemical In-Situ
Sensors for Monitoring Corrosion on Aircraft,” G.D.
Davis, Lockheed Martin Tactical Aircraft Systems
(Fort Worth, TX, November 1997).
175.
“In-Situ
Electrochemical Sensors for Detecting Corrosion on
Aging Aircraft,” G.D. Davis, C.M. Dacres, and
M. Shook, 1997 USAF Aircraft Structural Integrity
Program Conference (San Antonio, TX, December 1997).
176.
“Electrochemical Sensor for Detecting
Moisture in Composites,” G.D. Davis, C.M.
Dacres, L.A. Krebs, and C.E. Bevans, 4th
DOD Composites Repair Technology Workshop (Santa Fe,
NM, February 1998).
177.
“In-Situ
Corrosion Sensor for Detecting Coating and Substrate
Degradation,” L.A. Krebs,
G.D. Davis, and C.M. Dacres, Corrosion98
T-3L-13 Committee Meeting (San Diego, CA, March 1998).
178.
“Plasma Sprayed Coatings for Surface
Treatments of Titanium Adherends for High Temperature
Applications,” G.D. Davis and G.B. Groff, 5th
Inter. Conf. on Adhesion and Surface Analysis, (Loughborough,
UK, April 1998).
179.
“The Adhesion Kingdom,” G.D. Davis,
5th Inter. Conf. on Adhesion and Surface
Analysis, (Loughborough, UK, April 1998). (INVITED).
180.
“Development of an Electrochemistry-Based
Corrosion Sensor to Monitor Corrosion of Boiler Tubes,
Pipes, and Painted Structures,” C.M. Dacres,
G.D. Davis, and M.B. Shook, Society for Photo-optical
Instrumentation Engineers:
Nondestructive Evaluation of Utilities and
Pipelines II, (San Antonio, TX, April 1998).
181.
“An In-Situ
Electrochemical Sensor for Detecting Corrosion of
Painted Structures,” G.D. Davis, 1998 William
Blum Award Lecture, National Capital Area Section of
The Electrochemical Society, (Washington, DC, May
1998) (INVITED).
182.
“In-Situ
Corrosion Sensor for Detecting Coating and Substrate
Degradation,” G.D. Davis, L.A. Krebs, and C.M.
Dacres, Gordon Research Conference on the Science of
Adhesion (Tilton, NH, August 1998)
183.
“Electrochemical In-Situ
Sensors for Detecting Corrosion on Aging Aircraft,” G.D.
Davis, L.A. Krebs, and C.M. Dacres, 3rd
Inter. Aircraft Corrosion Workshop (Solomons, MD,
August 1998).
184.
“In-Situ
Sensor to Detect Moisture Intrusion and Degradation of
Coatings, Composites, and Adhesive Bonds,” G.D.
Davis, L.A. Krebs, and C.M. Dacres, 1st
World Congress on Adhesion and Related Phenomena (Garmimsch-Partenkirchen,
Germany, September 1998).
185.
“Cyclic
Corrosion Testing of Spontaneous Polymerized Coatings
Using an In-Situ Corrosion Sensor,” G.D. Davis,
L.A. Krebs, C.M. Dacres, J.P. Bell, and C.Y. Wu, 22nd
Annual Meeting Adhes. Soc., (Panama City Beach, FL,
February 1999).
186.
“Accelerataed Testing of Primers and Appliqués
Using an In-Situ Corrosion Sensor,” G.D.
Davis, L.A. Krebs, C.M. Dacres, B.P. Apgar, and
G.D. Gross, AFRL 1999 Technology Symposium on
Long-Lived Aircraft Primers (Dayton, OH, July 1999).
187.
“Detection
of Moisture in Composites Using an Electrochemical
Impedance Spectroscopy Sensor,” G.D. Davis,
L.A. Krebs, and C.M. Dacres,. 3rd
Joint FAA/DOD/NASA Conference on Aging Aircraft (Albuquerque,
NM, September 1999).
188.
“In-Situ Sensor to Detect Moisture Intrusion
and Degradation of Coatings, Composites, and Adhesive
Bonds,” G.D. Davis, C.M. Dacres, and L.A.
Krebs. 1999 Tri-Services Conference on Corrosion
(Myrtle Beach, SC, November 1999).
189.
“Bondable Stainless Surface (BOSS) Coatings
Technology Demonstration,” T.F. Davidson, E.M.
Williams, R. Zatorski, and G.D. Davis, 49th JANNAF
Propulsion Meeting (Tucson, AZ, December 1999).
190.
“The Use of Electrochemical Impedance
Spectroscopy to Detect Moisture Intrusion into
Adhesive Bonds,” G.D. Davis, L.A. Krebs, L.T.
Drzal, M.J. Rich, and P. Askeland, 23rd Annual Meeting
Adhesion Society, (Myrtle Beach, SC, February 2000).
191.
“Pretreatment Studies on Aluminum Alloys for
a Coating Process,” A.P.S. Tihaiya, J.P. Bell,
G.D. Davis, and T.R. Hanlon, 23rd Annual Meeting
Adhesion Society, (Myrtle Beach, SC, February 2000).
192.
“EIS-Based In-Situ Sensor for the Early
Detection of Coating Degradation and Substrate
Corrosion,” G.D. Davis, C.M. Dacres, and L.A.
Krebs, Corrosion2000, Paper 275 (NACE, Orlando, FL,
March 2000).
193.
“Evaluation of S-Poly and Other Coatings
Using an In-Situ Corrosion Sensor,” G.D.
Davis, Current Topics in Adhesion Science and
Composites, (Storrs, CT, May 2000) (INVITED).
194.
“The Residue (Smut) Formed on Aluminum Alloys
During Hydrofluoric Acid Etching and its Effect on a
Coating Process,” A.P.S. Tihaiya, J.P. Bell,
G.D. Davis, and T.R. Hanlon, 2nd Internatl.
Symp. on Adhes. Aspects of Polymeric Coatings,
(Newark, NJ, May 2000).
195.
“Use
of an In-Situ Corrosion Sensor to Detect Degradation
of Adhesive Bonds,” G.D. Davis, L.A. Krebs,
and C.M. Dacres, 4th Inter. Aircraft
Corrosion Workshop, (Solomons Island, MD, Auguest
2000).
196.
“Use of an Electrochemical Impedance Sensor
to Detect Moisture in Composites,” G.D. Davis,
L.A. Krebs, and C.M. Dacres, 5th DoD
Composite Repair Technology Workshop, (Coeur d”Alene,
ID, November 2000).
197.
“Detecting Degradation of Adhesive Bonds With
an In-Situ Corrosion Sensor,” G.D. Davis,
L.A. Krebs, and C.M. Dacres, 24th Annual
Meeting Adhes. Soc (Williamsburg, VA, February 2001).
198.
“Effects of Polymer Composition on the
Properties of Fluorinated Coatings,” H. Zheng, J.P.
Bell, and G.D. Davis, 24th
Annual Meeting Adhes. Soc., (Williamsburg, VA,
February 2001).
199.
“Monitoring Moisture Intrusion and Coating
Degradation in the Field,” L.A. Krebs, G.D.
Davis, and C.M. Dacres, Corrosion2001, Paper 1430
(Houston, TX, March 2001).
200.
“The Use of Tobacco Extracts as Corrosion
Inhibitors,” G.D. Davis, J. A. von
Fraunhofer, L.A. Krebs, C.M. Dacres, Corrosion2001,
Paper 1558 (Houston, TX, March 2001)
201.
“Combining Electrochemical and XPS
Measurements for the Complete Picture,” G.D.
Davis, 199th Meeting Electrochemical
Society (Washington, DC, March 2001) (INVITED).
202.
“In-Situ Electrochemical Corrosin
Sensor to Monitor Materials Degradation in the
Laboratory and in the Field,” G.D. Davis,
L.A. Krebs, and C.M. Dacres, 199th Meeting
Electrochemical Society (Washington, DC, March 2001).
203.
, “Sensor to Detect Moisture/Degradation of
Composites and Adhesive Bonds,” G.D. Davis,
L.A. Krebs, and C.M. Dacres, 46th Inter.
SAMPE Symp. (Long Beach, CA May 2001).
204.
“In-Situ Sensor to Detect Moisture Intrusion
and Degradation of Coatings, Composites, and Adhesive
Bonds,” G.D. Davis, Michigan State University
(East Lansing, MI, June 2001) (INVITED).
205.
“Detection of Moisture in Composites and
Adhesive Bonds Using an Electrochemical Impedance
Sensor,” G.D. Davis, L.A. Krebs, and C.M. Dacres,
8th Internat. Conf. Composites Engineering (Santa
Cruz, Tenerife, Spain, August 2001).
206.
“Electrochemical Sensor to Detect Moisture
and Degradation of Coatings, Composites, and Adhesive
Bonds,” G.D. Davis, University of Delaware
(Newark, DE, September 2001) (INVITED).
207.
“Using Electrochemical Impedance Spectroscopy
to Monitor Bond Durability,” G.D. Davis, 7th
Internat. Conf. on Adhesion and Surface Analysis (Loughborough,
UK, March 2002) (INVITED).
208.
“Bondable Stainless Surface (BOSS) Coatings
Technology Demonstration,” K. Morgan, T.F.
Davidson, E.W. Grove, R.A. Zatorski, and G.D. Davis,
U.S. Army Corrosion Summit 2002 (St. Petersburg, FL,
March 2002).
209.
“Predictive Assessment of Bonded Repair Using
an In-Situ Electrochemical Impedance Sensor,” G.D.
Davis and B.J. Harkless, 5th Internat.
Aircraft Corrosion Workshop (Solomons Island,
MD, August 2002).
210.
“The Use of Extracts of Tobacco Plants as
Corrosion Inhibitors,” G.D. Davis and J.A.
von Fraunhofer, 202nd Meeting of the
Electrochemical Society (Salt Lake City, UT, October
2002) (INVITED).
211.
“Detection of Moisture in Adhesive Bonds
Using Electrochemical Impedance Spectroscopy,” G.D.
Davis, 34th Intern. SAMPE Tech. Conf.
(Baltimore, MD, November 2002).
212.
“Development of an Electrochemical Impedance
Sensor to Monitor Delamination and Moisture Uptake in
CFRP-Reinforced Concrete Structures,” G.D. Davis,
M. J. Rich, R.S. Harichandran, L. T. Drzal, T. Mase,
and A. Al-Ostaz, 82nd Transportation Research Board
Annual Meeting (Washington, D.C., January 2003).
213.
“Detecting
Delamination and Moisture Intrusion of
Graphite/Epoxy-Concrete Structures Using
Electrochemical Impedance Sensors,” G.D. Davis,
M. J. Rich, and L. T. Drzal, 26th
Annual Meeting Adhes. Soc., (Myrtle Beach, SC,
February, 2003)
214.
“Use
of Embedded Corrosion Sensors and Sensor Blankets to
Detect Paint Degradation,” G.D. Davis,
Corrosion2003, Paper 3441 (San Diego, CA, March 2003).
215.
“Use of an Electrochemical Impedance Sensor
to Monitor Delamination and Moisture Uptake in CFRP-Reinforced
Concrete Structures,” G.D. Davis, S. Mani,
M.J. Rich, L.T. Drzal, and R.S. Harichandran, 14th
Inter. Conf. Composite Materials, (San Diego, CA, July
2003).
216.
“Using an EIS Corrosion Sensor to Monitor
Coating Degradation,” G.D. Davis, Gordon
Research Conference on Coatings and Films (New London,
NH, July 2003) (INVITED).
217.
“Development of Appliques with Embedded
Corrosion Sensors for Corrosion Protection and Health
Monitoring,” G.D. Davis and T.L. Vargo, ASM
International Materials Solution 2003 (Pittsburgh, PA,
October 2003).
218.
“The Application Of Electrochemical Impedance
Spectroscopy For Non-Destructive Evaluation Of
Composite Bonded Structures” S. Mani, G.D.
Davis, M.J. Rich, and L.T. Drzal, 18th
American Society of Composites Technical Conference
(Gainesville, FL, October 2003).
219.
"EIS-based NDE of bond integrity in
concrete bridges strengthened with CFRP." R.
S. Harichandran, S. Hong, A. Al-Ostaz, and G. D.
Davis, 1st International Conference on
Structural Health Monitoring and Intelligent
Infrastructure, (Tokyo, Japan, November 2003).
220.
“Smart
Appliqués for Corrosion Protection and Health
Monitoring,” G.D.
Davis,
T.G. Vargo, A.W. Dalgleish, and D. Deason, 2003
Tri-Services Conference on Corrosion (Las Vegas, NV,
November 2003).
221.
“Evaluation of Composite Adhesive Bonds with
an Electrochemical Impedance Sensor,” S. Mani,
M.J. Rich, L.T. Drzal, and G.D. Davis, 27th
Annual Meeting Adhes. Soc., (Wilmington, NC, February
2004).
222.
“Detecting
Defects and the Onset of Failure Of Adhesive Bonds
Using Electrochemical Impedance Spectroscopy,” S.
Mani, M.J. Rich, R.J. Jurek, L.T. Drzal, and G.D.
Davis, ANTEC 2004, (Society of Plastics Engineers,
Chicago, IL, May 2004).
223.
“Thermal
Sprayed Polymeric Coatings for Corrosion Protection
and Impact Resistance of Landing Gear,” G.D.
Davis and R.S. Zatorski, 6th Inter.
Aircraft Corrosion Workshop, (Solomons Island, MD,
August 2004).
224.
“Thermal
Sprayed Polymeric Coatings for Landing Gear,” G.D.
Davis and R.S. Zatorski, ASM International
Materials Solution 2004 (Columbus, OH, October 2004).
225.
“Using
Electrochemical Impedance Spectroscopy for Health
Monitoring of Composite-Composite and
Aluminum-Composite Bonds,”
G.D. Davis, S. Mani, M.J. Rich, and L.T. Drzal,
28th Annual Meeting Adhes. Soc., (Mobile,
AL, February 2005).
226.
“Corrosion Protection and Health Monitoring
by Smart Appliqués,” G.D. Davis, T.G. Vargo,
A.W. Dalgleish, and D. Deason, Corrosion2005, Paper
05205 (Houston, TX, April 2005).
227.
“Corrosion Health Monitor for Ground
Vehicles,” G.D. Davis, F. Garra, S. Raghu, R.
Srinivasan, B.G. Carkhuff, and T.E. Phillips, 2005
Tri-Services Conference on Corrosion (Orlando, FL,
November 2005).
228.
“Miniature
Wireless Full Spectrum EIS Corrosion Sensor” R.
Srinivasan, B.G. Carkhuff, T.E. Phillips,
H.
Saffarian,
G.D. Davis, and S. Raghu, 2005 Tri-Services Conference
on Corrosion (Orlando, FL, November 2005).
229.
“Corrosion
Protection with Appliqués,” D. Deason, Kelly
Sacco Dreiling, G.D. Davis, and T.G. Vargo, Army
Corrosion Summit (Clearwater Beach, February 2006).
230.
“Sealant
Evaluation Using Electrochemical Impedance
Spectroscopy,” G.D. Davis and J.G. Dillard,
29th Annual Meeting Adhes. Soc.,
(Jacksonville, FL, February 2006).
231.
“Corrosion
Protection with Appliqués -- Comparison of Laboratory
and Hawaii Exposures,” G.D. Davis, F. Garra,
T.G. Vargo, A.W. Dalgleish, D. Deason,
and
Roger D. Schwerman, Corrosion2006, Paper 05205 (San
Diego, March 2006).
232.
“Coating
Health Monitoring System for Army Ground Vehicles,” G.D.
Davis, R.A. Ross, and S. Raghu, Corrosion2007,
Paper 07230 (Nashville, TN, March 2007).
233.
“Corrosion
Protection and Health Monitoring Using Smart Appliqués,”
G.D. Davis, T.G. Vargo, and D.M. Deason,. SAMPE
’07 (Baltimore, June 2007).
234.
“Using
an EIS Corrosion Sensor to Monitor Coating
Degradation,” G.D. Davis, University of
Virginia (Charlottesville, VA, July 2007).
(INVITED).
