Publications

1.        G.D. Davis and M.G. Lagally, "Auger and Electron-Energy Loss Spectra from GeS (001)," J. Vac. Sci. Technol. 14, 480 (1977).

2.        G.D. Davis and M.G. Lagally, "Measurement of Valence Band Auger Spectra from GaAs (110) from Ga and As CCV Transitions," J. Vac. Sci. Technol. 15, 1311 (1978).

3.        G.D. Davis, P.E. Viljoen, M.G. Lagally, and J.E. Rowe, "Density of Empty States in GeSe (001) and GeS (001)," J. Vac. Sci. Technol. 16, 625 (1979).

4.        G.D. Davis, P.E. Viljoen, and M.G. Lagally, "Determination of Shallow-Core-Level Spectra in Selected Compound Semiconductors," J. Electron Spectrosc. Relat. Phenom. 20, 305 (1980).

5.        G.D. Davis, P.E. Viljoen, and M.G. Lagally, "Comparison of Site-Specific Valence Band Densities of States Determined from Auger Spectra and XPS-Determined Valence Band Spectra In GeS (001) and GeSe (001)," J. Electron Spectrosc. Relat. Phenom. 21, 135 (1980).

6.        G.D. Davis, D.E. Savage, and M.G. Lagally, "Site-Specific Densities of States for Cleaved and Sputtered GaAs (110) from Auger Line Shapes," J. Vac. Sci. Technol. 18, 904 (1981).

7.        G.D. Davis, D.E. Savage, and M.G. Lagally, "Comparison of Site-Specific Densities of States of Ga and As in Cleaved and Sputtered GaAs (110) by Means of Auger Line Shapes," J. Electron Spectrosc. Relat. Phenom. 23, 25 (1981).

8.        G.D. Davis and M.G. Lagally, "Correction for Loss Effects in Valence-Band XPS Spectra by Deconvolution," J. Vac. Sci. Technol. 18, 727 (1981).

9.        G.D. Davis, T.S. Sun, S.P. Buchner, and N.E. Byer, "The Anodic Oxide Composition and Hg Depletion at the Oxide-Semiconductor Interface of (Hg,Cd)Te," J. Vac. Sci. Technol. 19, 472 (1981). 

10.     G.D. Davis, T.S. Sun, S.P. Buchner, and N.E. Byer, "Properties of Passivant Films On HgCdTe - Interaction with the Substrate," Infrared Detector Materials, Proc. Soc. Photo-Opt. Instrum. Eng.,  Vol. 285 (Washington, Dc, 1981), p. 126, and Technical Issues in Focal Plane Development, Proc. Soc. Photo-Opt. Instrum. Eng.,  Vol. 282 (Washington, Dc, 1981), p. 106.

11.     S.P. Buchner, G.D. Davis, J.V. Liou, and N.E. Byer, "Passivation Studies of (Hg,Cd)Te," Proc. IRIS Detector Specialty Group Meeting  (Syracuse, Ny, 1981).

12.     G.D. Davis, T.S. Sun, J.S. Ahearn, and J.D. Venables, "Application of Surface Behavior Diagrams to the Study of Hydration of PAA Surfaces," J. Mater. Sci. 17, 1807 (1982).

13.     J.S. Ahearn, G.D. Davis, and N.E. Byer, "Mechanism of Anodic Oxidation of Hg0.8Cd0.2Te," J. Vac. Sci. Technol. 20, 756 (1982).

14.     S.P. Buchner, G.D. Davis, and N.E. Byer, "Photochemical Oxidation of (Hg,Cd)Te," J. Vac. Sci. Technol. 21, 446 (1982).

15.     J.S. Ahearn, G.D. Davis, T.S. Sun, and J.D. Venables, "Correlation of Surface Chemistry and Mechanical Properties of Aluminum/Polymer Bonds," Adhesion Aspects of Polymer Coatings,  K.L. Mittal, ed., (Plenum Press, New York, 1983), p. 281.

16.     G.D. Davis and J.D. Venables, "Surface and Interfacial Analysis," in Durability of Structural Adhesives,  A.J. Kinloch, ed.,  (Applied Science, Essex, 1983), p. 43.

17.     G.D. Davis, S.P. Buchner, W.A. Beck, and N.E. Byer, "Use of Surface Behavior Diagrams to Compare Anodic and Photochemical Oxides of Hg0.8Cd0.2Te," Appl. Surf. Sci. 15, 238 (1983).

18.     G.D. Davis, M. Natan, and K.A. Anderson, "Study of Chromic-Acid-Anodized Titanium Oxide Using Auger Line Shapes," Appl. Surf. Sci. 15, 321 (1983)

19.     R.R. Daniels, G. Margaritondo, G.D. Davis, and N.E. Byer, "Changes in the Local Chemical Composition During the Hg1-xCdxTe-Al Interface Formation," Appl. Phys. Lett. 42, 50 (1983).

20.     G.D. Davis, S.P. Buchner, and N.E. Byer, "Composition Study of Photochemically Grown Oxides of Hg1-xCdxTe," J. Vac. Sci. Technol. A 1, 670 (1983).

21.     G.D. Davis, N.E. Byer, R.R. Daniels, and G. Margaritondo, "Interaction of Thin Layers of Al and Ge with Cleaved (Hg,Cd)Te Surfaces," J. Vac. Sci. Technol. A 1, 1726 (1983).

22.     G.D. Davis, S.P. Buchner, J.S. Ahearn, and N.E. Byer, "The Anodic Oxide of Hg1-xCdxTe:  The Composition and Reaction with the Substrate," Technical Issues in Focal Plane Development, Proc. Soc. Photo-Opt. Instrum. Eng., Vol. 409 (Arlington, Va, 1983), p. 35.

23.     N.E. Byer, G.D. Davis, S.P. Buchner, and J.S. Ahearn, "Insulator Interfaces with Hg1-xCdxTe," Proc. Int. Conf. Insulating Films on Semiconductors , (Eindhoven, The Netherlands, 1983), p. 238.

24.     G.D. Davis, J.S. Ahearn, and J.D. Venables, "Hydration of Aluminum Adherends as Studied by Surface Behavior Diagrams," Proc. 15th Nat. SAMPE Tech. Conf.  (Cincinnati, OH, 1983), p. 202.

25.     G.D. Davis, W.A. Beck, N.E. Byer, R.R. Daniels, and G. Margaritondo, "Deposition of Au Overlayers onto Cleaved (Hg,Cd)Te Surfaces," J. Vac. Sci. Technol. A 2, 546 (1984).

26.     G.D. Davis, J.S. Ahearn, and J.D. Venables, "Use of Surface Behavior Diagrams to Study Hydration/Corrosion of Aluminum and Steel Surfaces," J. Vac. Sci. Technol. A 2, 763 (1984).

27.     G.D. Davis, J.S. Ahearn, and J.D. Venables, "Hydration Inhibitor Properties for Improved Durability of Aluminum Adhesive Bonds," Proc. Int. Adhesion Conf. 1984  (Nottingham, England, 1984), p. 12a1.

28.     G.D. Davis, J.S. Ahearn, L.J. Matienzo, and J.D. Venables, "Use of Hydration Inhibitors to Improve Bond Durability of Aluminum Adhesive Joints," J. Mater. Sci. 20, 975 (1985).

29.     G.D. Davis, N.E. Byer, R.A. Riedel, R.R. Daniels, and G. Margaritondo, "Surface Stoichiometry Changes Induced by the Hydrogenation of Hg0.72Cd0.28Te," J. Vac. Sci. Technol. A 3, 203 (1985).

30.     G.D. Davis, N.E. Byer, R.A. Riedel, and G. Margaritondo, "Interactions between Cleaved (Hg,Cd)Te Surfaces and Deposited Overlayers of Al and In," J. Appl. Phys. 57, 1915 (1985).

31.     G.D. Davis, D.K. Shaffer, L.J. Matienzo, and J.S. Ahearn, "Adsorption of Amino Phosphonates onto Anodized 7075-T6 Aluminum Surfaces and their Use in Improving Adhesion Properties," J. Vac. Sci. Technol. A 3, 1418 (1985).

32.     G.D. Davis, N.E. Byer, R.A. Riedel, and G. Margaritondo, "Deposition of Al Overlayers onto Cleaved (HgCd)Te Surfaces," J. Vac. Sci. Technol. A 3, 981 (1985).

33.     L.J. Matienzo, D.K. Shaffer, W.C. Moshier, and G.D. Davis, "The Use of Organic Corrosion Inhibitors to Improve the Durability of Adhesion Between Aluminum and Polymer Coatings," Polymeric Materials Science and Engineering 53, 592 (1985).

34.     L.J. Matienzo, D.K. Shaffer, W.C. Moshier and G.D. Davis, "Environmental and Adhesive Durability of Aluminum-Polymer Systems Protected with Organic Corrosion Inhibitors" J. Mater. Sci. 21, 1601 (1986).

35.     G.D. Davis and M. Natan, "Effects of Impurities on the Reaction of Ta and Si Multilayers Processed by Rapid Thermal Annealing" J. Vac. Sci. Technol. A 4, 159 (1986).

36.     L.J. Matienzo, D.K. Shaffer, W.C. Moshier, and G.D. Davis, "The Use of Organic Corrosion Inhibitors to Improve the Durability of Adhesion Between Aluminum and Polymer Coatings,. Polymeric Materials for Corrosion Control,  (R.A. Dickie and F.L. Floyd, eds., (American Chemical Society, Washington, D.C., 1986), p. 234.

37.     G.D. Davis, "Use of Surface Behavior Diagrams to Study Surfaces and Interfacial Reactions," Surf. Interface Anal. 9, 421 (1986).

38.     G.D. Davis, W.A. Beck, E. Colavita, M.K. Kelly, D.W. Niles, N. Tache, and G. Margaritondo, "Deposition of Thin Al and Au Overlayers onto Sputtered  (Hg,Cd)Te Surfaces," J. Vac. Sci. Technol. A 4, 850 (1986).

39.     W.C. Moshier, G.D. Davis, J.S. Ahearn, and H.F. Hough, "Influence of Molybdenum on the Pitting Corrosion of Aluminum Films," J. Electrochem. Soc. 133, 1063 (1986).

40.     G.D. Davis, W.A. Beck, D.W. Niles, E. Colavita, and G. Margaritondo, "Deposition of the Reactive Metals Al and In onto Sputtered and Cleaved Hg1-xCdxTe Surfaces," J. Appl. Phys. 60, 3150 (1986).

41.     G.D. Davis, W.A. Beck, M.K. Kelly, N. Tache, and G. Margaritondo, "Deposition of the Unreactive Metal Au Onto Sputtered and Cleaved Hg1-xCdxTe Surfaces," J. Appl. Phys. 60, 3157 (1986).

42.     G.D. Davis, J.S. Ahearn, and W.C. Moshier, "Surface Behavior Diagrams and their Role in Predicting Adhesion and Corrosion Behavior," Proc. Corrosion Prevention and Control Conf.  (Williamsburg, VA, 1986), p. 84.

43.     W.C. Moshier, G.D. Davis, J.S. Ahearn, and H.F. Hough, "Influence of Molybdenum Additions on the Pitting Corrosion of Aluminum Films," Proc. Corrosion Prevention and Control Conf.  (Williamsburg, VA, 1986), p. 103.

44.     G.D. Davis, W.A. Beck, M.K. Kelly, Y.W. Mo, and G. Margaritondo, "Effect of Surface Preparation on Ge Overlayer Growth on (HgCd)Te," Appl. Phys. Lett. 49, 1611 (1986).

45.     G.D. Davis, "Overlayer Growth on (HgCd)Te," Vuoto 16, 127 (1986).

46.     W.C. Moshier, G.D. Davis, and J.S. Ahearn, "Corrosion and Passivity of Aluminum Exposed to Dilute Sodium Sulfate Solutions," Corros. Sci. 27, 785 (1987).

47.     W.C. Moshier, G.D. Davis, J.S. Ahearn, and H.F. Hough, "Corrosion Behavior of Aluminum-Molybdenum Alloys in Chloride Solutions," J. Electrochem. Soc. 134, 2677 (1987).

48.     G.D. Davis, W.C. Moshier, J.S. Ahearn, H.F. Hough, and G.O. Cote,  "Corrosion/Passivation of Aluminum in Dilute Sulfate Solutions:  A Comparison of Pourbaix and Surface Behavior Diagrams," J. Vac. Sci. Technol. A 5, 1152 (1987).

49.     G.D. Davis, W.A. Beck, M.K. Kelly, Y.W. Mo, and G. Margaritondo, "Growth of Ge Overlayers onto (HgCd)Te:  A Comparison between Cleaved and Sputtered Surfaces," J. Vac. Sci. Technol. A 5, 1479 (1987).

50.     J.S. Ahearn and G.D. Davis, "Improved Durability of Aluminum Adhesive Bonds with Phosphonic Acid Inhibitors," J. Adhes. 28, 75 (1989).

51.     G.D. Davis, W.A. Beck, Y.W. Mo, D. Kilday, and G. Margaritondo, "Interfacial Interactions between (HgCd)Te and Ti, an Ultrareactive Metal," J. Appl. Phys. 61, 5191 (1987).

52.     G.D. Davis, "Characterization of Surfaces," in Adhesive Bonding, L.H. Lee, ed., (Plenum, New York, 1991), p. 139.

53.     H.M. Clearfield and G.D. Davis, "Comment on 'Sodium Hydroxide Anodization of Ti-6Al-4V Adherends,'" J. Adhes. 24, 221 (1987).

54.     W.C. Moshier, D.-W. Tu, and G.D. Davis, "Oxygen Contamination of Ge During Thermal Evaporation of Ohmic Contacts to n-type GaAs," J. Vac. Sci. Technol. B 6, 582 (1988).

55.     G.D. Davis, H.M. Clearfield, W.C. Moshier, and G.O. Cote, "New Approaches to Failure Analysis Using XPS Sputter-Depth Profiles," Surf. Interface Anal. 11, 359 (1988).

56.     G.D. Davis, W.A. Beck, M.K. Kelly, D. Kilday, Y.W. Mo, N. Tache, and G. Margaritondo, "Interactions Between (HgCd)Te and Overlayers of Intermediate Reactivity (Ag, Cu, and Ge)," Phys. Rev. B. 38, 9694 (1988).

57.     J.S. Ahearn and G.D. Davis, "Adhesive Bond Durability of Aluminum," Proc. Adhesion '87  (York, England, 1987), p. 291.

58.     G.D. Davis, "Overlayer Interactions with (HgCd)Te," J. Vac. Sci. Technol. A. 6, 1939 (1988).

59.     C.O. Arah, J. Vogin, D. McNamara, J. Ahearn, A. Berrier, and G.D. Davis, "Moisture-Resistant Low-Temperature-Curing Adhesives," Proc. 5th Int. Symp. Structural Adhesive Bonding   (Dover, NJ, 1987), p. 440.

60.     W.C. Moshier, G.D. Davis, and G.O. Cote, "Surface Chemistry of Sputter-Deposited Al-Mo and Al-Cr Alloys Polarized In 0.1 N KCl," J. Electrochem. Soc. 136, 356 (1989).

61.     W.C. Moshier and G.D. Davis, "Interaction of Molybdate Anions with the Passive Film on Aluminum," Corros. 46, 43 (1990).

62.     H.M. Clearfield, D.K. McNamara, and G.D. Davis, "Adherend Surface  Preparation for Structural Adhesive Bonding," in Adhesive Bonding,  L.H. Lee, ed., (Plenum, New York, 1991), p. 203.

63.     G.D. Davis, W.A. Beck, D. Kilday, Y.W. Mo, and G. Margaritondo, "Interfacial Reactions between (HgCd)Te and Intermediate Reactivity Overlayers," J. Vac. Sci. Technol. A 6, 2732 (1988).

64.     G.D. Davis, W.A. Beck, D.G. Kilday, J.T. McKinley, and G. Margaritondo, "Effects of Thin Interlayers on Ag/(HgCd)Te Interface Behavior," J. Vac. Sci. Technol. A 7, 870 (1989).

65.     G.D. Davis, J.T. McKinley, D.G. Kilday, and G. Margaritondo, "Effects of Al and Ti Interlayers on Sb/(HgCd)Te Interface Behavior," J. Appl. Phys. 65, 3435 (1989).

66.     T.C. Simpson, P.J. Moran, W.C. Moshier, G.D. Davis, B.A. Shaw, C.A. Arah and K.L. Zankel, "An Electrochemical Monitor for the Detection of Coating Degradation in Atmosphere," J. Electrochem. Soc. 136, 2761 (1989).

67.     G.D. Davis, W.C. Moshier, T.L. Fritz, and G.O. Cote, "Evolution of the Chemistry of Passive Films of Sputter-Deposited, Supersaturated Al Alloys," J. Electrochem. Soc. 137, 422 (1990).

68.     G.D. Davis, B.A. Shaw, C.O. Arah, T.L. Fritz, W.C. Moshier, T.C. Simpson, P.J. Moran, and K.L. Zankel, "Effects of SO2 Deposition on Painted Steel Surfaces," Surf. Interface Anal. 15, 107 (1990).

69.     B.A. Shaw, G.D. Davis, T.L. Fritz, and K.A. Olver, "A Molybdate Treatment for Enhancing the Passivity of Aluminum in Chloride-Containing Environments," J. Electrochem. Soc. 137, 359 (1990).

70.     T.C. Simpson, P.J. Moran, H. Hampel, G.D. Davis, B.A. Shaw, C.A. Arah, T.L. Fritz, and K.L. Zankel, "Electrochemical Monitoring of Organic Coating Degradation during Atmospheric or Vapor Phase Exposure," Corros. 46, 331 (1990).

71.     T.C. Simpson, P.J. Moran, H. Hampel, G.D. Davis, B.A. Shaw, C.A. Arah, T.L. Fritz, and K.L. Zankel, "Electrochemical Impedance Measurements for Evaluating and Predicting the Performance of Organic Coatings for Atmospheric Exposure," Corrosion Testing and Evaluation:  Silver Anniversary Volume,  ASTM STP 1000, R. Baboian and S.W. Dean, eds., (Amer. Soc. Testing and Materials, Philadelphia, 1990) p. 397.

72.     B.A. Shaw, T.L. Fritz, G.D. Davis, and W.C. Moshier, "The Influence of Tungsten on the Pitting of Aluminum Films," J. Electrochem. Soc. 137, 1317 (1990).

73.     W.A. Beck, G.D. Davis, and A.C. Goldberg, "Resistance and 1/f Noise of Au, Al, and Ge Contacts to (Hg,Cd)Te," J. Appl. Phys. 67, 6340 (1990).

74.     H.M. Clearfield, D.K. McNamara, and G.D. Davis, "Surface Preparation of Metals," Handbook on Engineered Materials, Vol. 3: Adhesives and Sealants, H.F. Brinson, Chm., (ASM International, Metals Park, OH, 1990) p. 259.

75.     G.D. Davis, "Surface Analysis Techniques and Applications," Handbook on Engineered Materials, Vol. 3: Adhesives and Sealants,  H.F. Brinson, Chm., (ASM International, Metals Park, OH, 1990) p. 236.

76.     G.D. Davis, "Surface Treatments of Aluminum and Titanium:  From Basic Research to Production Failure Analysis," Surf. Interface Anal. 17, 439 (1991).

77.     G.D. Davis, "Surface Considerations," Handbook on Engineered Materials Vol. 3: Adhesives and Sealants,  H.F. Brinson, Chm., (ASM International, Metals Park, OH, 1990) p. 235.

78.     T.C. Simpson, H. Hampel, G.D. Davis, C.O. Arah, T.L. Fritz, P.J. Moran, B.A. Shaw, and K.L. Zankel, "Evaluation of the Effects of Acidic Deposition on Coated Steel Substrates," Prog. Organic Coatings  20, 199 (1992).

79.     G.D. Davis, T.L. Fritz, K.A. Olver, B.J. Rees, B.A. Shaw, and W.C. Moshier "Passivity Enhancement of Aluminum with Tungsten Alloying Additions," in The Application of Surface Analysis Methods to Environmental/Materials Interactions,  D.R. Baer, C.R. Clayton, and G.D. Davis, eds., Proceedings Volume 91-7, (Electrochemical Society, Pennington, NJ, 1991), p. 479.

80.     D.R. Baer, C.R. Clayton, and G.D. Davis, eds., The Application of Surface Analysis Methods to Environmental/Materials Interactions,  Proceedings Volume 91-7, (Electrochemical Society, Pennington, NJ, 1991).

81.     B.A. Shaw, G.D. Davis, T.L. Fritz, B.J. Rees, and W.C. Moshier, "A Study of the Influence of Tungsten Alloying Additions on the Passivity of Aluminum," J. Electrochem. Soc. 138, 3288 (1991).

82.     G.D. Davis, W.C. Moshier, G.G. Long, and D.R. Black, "Passive Film Structure of Super-Saturated Al-Mo Alloys," J. Electrochem. Soc. 138, 3194 (1991) and in X-Ray Methods in Corrosion and Interfacial Electrochemistry,  A. Davenport and J.G. Gordon, II, eds., Proceedings Volume 92-1, (Electrochemical Society, Pennington, NJ, 1992), p. 283.

83.     B.A. Shaw, G.D. Davis, T.L. Fritz, B.J. Rees, and W.C. Moshier, "Enhancing the Localized Corrosion Resistance of Aluminum through Nonequilibrium Alloying," in Critical Factors In Localized Corrosion,  G. Frankel and R.C. Newman, eds., Proceedings Volume 92-9, (Electrochemical Society, Pennington, NJ, 1992), p. 323.

84.     G.D. Davis, T.F. Davidson, D. Johns, L.L. Kolonko, and R.L. Gause, "Contamination Sensitivity and Monitoring For SRM Bondlines," in Proc. 1992 JANNAF Propulsion Meeting, Pub. 580-III, (Chemical Propulsion Information Agency, Columbia, MD, 1992), p. 511.

85.     V.P. Thompson, T.L. Edler, and G.D. Davis, "XPS Characterization of Dentin and Dentin Treated with Bonding Conditioners," J. Adhes. 39, 157 (1992).

86.     G.D. Davis, "Contamination of Surfaces:  Origin, Detection, and Effect on Adhesion," Surf. Interface Anal. 20, 368 (1993).

87.     G.D. Davis and D.K. Shaffer, "Durability of Adhesive Joints," Handbook of Adhesive Technology,  K.L. Mittal and A. Pizzi, eds., (Marcel Dekker, New York, 1994), p. 113.

88.     D.K. Shaffer, G.D. Davis, D.K. McNamara, T.K. Shah, and A. Desai, "Durability Properties for Adhesively Bonded Structural Aerospace Applications," in Proc. 3rd Int. SAMPE Metals Conf. (SAMPE, Azusa, CA, 1992), p. M629.

89.     G.D. Davis, B.A. Shaw, B.J. Rees, and M. Ferry, "Mechanisms of Passivity of Non-Equilibrium Al-W Alloys," J. Electrochem. Soc. 140, 951 (1993).

90.     K.M. Liechti, A. Shirani, G.D. Davis, and B.J. Rees, "Nonlinear Plate Analysis of Thin Film Blistering," in Proc. 16th Annual Meeting Adhes. Soc. and Int. Symp. Interphase , F.J. Boerio, ed.,  (Adhesion Society, Cincinnati, OH, 1993), p. 149.

91.     G.D. Davis and L.L. Kolonko, "Process Control Methodology -- Process Sensitivity Evaluation of the Case to Insulation Bondline," in Proc. JANNAF Structure and Mechanical Behavior Subcommittee Meeting, Pub. 591 (Chemical Propulsion Information Agency, Columbia, MD, 1992), p. 67.

92.     F.J. Boerio, G.D. Davis, J.E. deVries, C.E. Miller, K.L. Mittal, R.L. Opila, and H.K. Yasuda, "Polymer-Metal (Oxide) Interfaces," in Current Status, Research Needs, and Opportunities in Applications of Surface Processing to Transportation and Utilities Technologies,  A.W. Czanderna and A.R. Landgrebe, eds., (National Renewable Energy Laboratory, Golden, CO, 1992), p. 23-1; and Crit. Rev. Surf. Chem. 3, 81 (1993).

93.     G.D. Davis, "Metal-Polymer Interphases in Structural Adhesive Joints," in Polymer/Inorganic Interfaces, R.L. Opila, A.W. Czanderna, and F.J. Boerio, eds., (Mater. Res. Soc. Proc., San Francisco, 1993), p. 3.

94.     G.D. Davis, C.R. Anderson, and H.M. Clearfield, "A Permanent, Retractable Screen for Charge Neutralization of Insulating Specimens during XPS Analysis," J. Vac. Sci. Technol. A 11, 3135 (1993).

95.     E.L. Principe, B.A. Shaw, C.A. Pecile, A.S. Iyengar, G.D. Davis, and B.J. Rees, "Nonequilibrium Alloying Studies on Passivity in Chloride Environments," in Proc. 12th Internat. Corrosion Congr. (NACE, Houston, TX, 1993), p. 2187.

96.    G.D. Davis, B.J. Rees, and P.L. Whisnant, "Chemical Evaluation of Cu-Polyimide Interfaces," J. Vac. Sci. Technol. A. 12, 2378 (1994).

97.     G.D. Davis, B.J. Rees, P.L. Whisnant, K.M. Liechti, and A. Shirani, “Chemical and Mechanical Analysis of Cu-Polyimide Interfaces,” in Proc. 17th Annual Meeting Adhes. Soc., K.M. Liechti, ed.,  (Adhesion Society, Blacksburg, VA, 1994), p. 66.

98.     G.D. Davis, B.A. Shaw, B.J. Rees, E.L. Principe, and C.A. Pecile, "Electrochemical Behavior and Surface Chemistry of Nonequilibrium Aluminum-Tantalum Alloys:  Solute-Rich Interphase Model," Surface Interface Anal. 23, 609 (1995).

99.     G.D. Davis, G.B. Groff, L.L. Biegert, and H. Heaton, “Plasma Spray Treatments for Steel Adherends,” J. Adhes. 54, 47 (1995).

100.  G.D. Davis, P.L. Whisnant, D.K. Shaffer, G.B. Groff, and J.D. Venables, “Plasma Sprayed Coatings as Surface Treatments of Aluminum and Titanium Adherends,” J. Adhes. Sci. Technol. 9, 527 (1995).

101.  G.D. Davis, P.L. Whisnant, and J.D. Venables, “Subadhesive Hydration of Aluminum Adherends and its Detection by Electrochemical Impedance Spectroscopy,” J. Adhes. Sci. Technol. 9, 433 (1995).

102.  G.D. Davis, T.F. Davidson, and R.L. Gause, "Bondline Contamination Studies:  An Overview,” in Proc. 1994 JANNAF Nondestructive Evaluation and Structures and Mechanical Behavior Meeting, (Chemical Propulsion Information Agency, Columbia, MD, 1994).

103.  G.D. Davis, G.B. Groff, L.L. Biegert, and H. Heaton, “Bondable Stainless Surface (BOSS) Coatings for Steel Cases,” in Proc. 1994 JANNAF Nondestructive Evaluation and Structures and Mechanical Behavior Meeting, (Chemical Propulsion Information Agency, Columbia, MD, 1994).

104.  G.D. Davis, P.L. Whisnant, and J.D. Venables, “Detection of Subadhesive Hydration of Aluminum Adherends by Electrochemical Impedance Spectroscopy,” in Proc. 18th Annual Meeting Adhes. Soc., J.W. Holubka, ed., (Adhesion Society, Blacksburg, VA, 1995), p. 218.

105.  G.D. Davis, G.B. Groff, M. Rooney, A.V. Cooke, and R. Boothe, “Plasma Sprayed Bondable Stainless Surface (BOSS) Coatings for Corrosion Protection and Adhesion Treatments,” in Proc. 1995 JANNAF Safety and Environmental Protection Subcommittee Workshop on Environmentally Sound Processing Technology, (Chemical Propulsion Information Agency, Columbia, MD, 1995).

106.  G.D. Davis, P.L. Whisnant, G.B. Groff, D.K. Shaffer, and J.D. Venables, “Plasma Sprayed Coatings as Surface Treatments of Aluminum Adherends,” Proc. 41^st Inter. SAMPE Symp. (SAMPE, Covina, CA 1996) p. 291.

107.  G.D. Davis, P.L. Whisnant, and J.P. Wolff, Jr., “Monitoring Adhesive Bond Integrity with Electrochemical Impedance Spectroscopy,” Proc. 41^st Inter. SAMPE Symp. (SAMPE, Covina, CA 1996), p. 544.

108.  G.D. Davis, A.V. Cooke, M. Rooney, G.B. Groff, R. Boothe, C. Simmons, T.R. Swauger, and P. Graham, “Plasma Sprayed Bondable Stainless Surface (BOSS) Coatings for Solid Rocket Motors,” in Proc. 1995 JANNAF Propulsion and Subcommittee Joint Meetings Technology, (Chemical Propulsion Information Agency, Columbia, MD, 1995).

109.  G.D. Davis, P.L. Whisnant, G.B. Groff, and J.D. Venables, “Use of Plasma Sprayed Coatings as Surface Treatments for Aluminum Adherends,” in Proc. 19^th Annual Meeting Adhes. Soc., T.C. Ward, ed., (Adhesion Society, Blacksburg, VA, 1996), p. 268.

110.  G.D. Davis, B.S. Wenner, G. B. Groff, and R.A. Zatorski, “Use of Plasma Sprayed Coatings as Surface Treatments for Aluminum Adherends,” in Proc. Annual Joint Service Pollution Prevention Conf. (American Defense Preparedness Assoc., Arlington, VA, 1996), p. 376.

111.  R.H. Turner, I. Segall, F.J. Boerio, and G.D. Davis, “Effect of Plasma Polymerized Primers on the Durability of Aluminum/Epoxy Adhesive Bonds,” J. Adhes. 62, 1 (1997).

112.  G.D. Davis, G.B. Groff, and R.A. Zatorski, “Plasma Sprayed Coatings as Treatments for Aluminum, Steel, and Titanium Adherends,” Surface Inter. Anal. 25, 366 (1997).

113.  J.D. Venables and G.D. Davis, “Making It Last After Making It Stick,” in Proc. 20^th Annual Meeting Adhes. Soc., L.T. Drzal and H.P. Schreiber, ed., (Adhesion Society, Blacksburg, VA, 1997), p. 331.

114.  R.H. Turner, I. Segall, F.J. Boerio, and G.D. Davis, “Effect of Plasma Polymerized Primers on the Durability of Aluminum/Epoxy Adhesive Bonds,” in Proc. 20^th Annual Meeting Adhes. Soc., L.T. Drzal and H.P. Schreiber, ed., (Adhesion Society, Blacksburg, VA, 1997), p. 695.

115.  G.D. Davis, “Thermal Spraying of Aluminum as an Adhesive Bond Pretreatment,” J. Metals, May 1997, p. 25.

116.  G.D. Davis, C.M. Dacres, M. Shook, and B.S. Wenner, “Electrochemical Sensors for Evaluating Corrosion and Adhesion on Polymer/Metal Structures,” in Proc. 4^th Internat. Conf. Composites Engineering (Kohala Coast, Hawaii, 1997), p. 267.

117.  G.D. Davis, C.M. Dacres, M. Shook, and B.S. Wenner, "Electrochemical In-Situ Sensors for Detecting Corrosion on Aging Aircraft," in Proc. Workshop on Intelligent NDE Sciences for Aging and Futuristic Aircraft, C. Ferregut, R. Osegueda, and A. Nuñez, ed., (El Paso, TX, 1997), p. 141.

118.  G.D. Davis, C.M. Dacres, and M.B. Shook, “Development of an Electrochemistry-Based Corrosion Sensor to Monitor Corrosion of Boiler Tubes, Pipes, and Painted Structures” in Nondestructive Evaluation of Utilities and Pipelines II, W.G. Reuter, ed., Proc. SPIE Vol. 3398, (Society for Photo-optical Instrumentation Engineers, Bellingham, WA, 1998), p. 92.

119.  P.H. Graham and G.D. Davis, “The Environmental Advantages of Bondable Stainless Surface (BOSS) Coatings,: in Proc. 1998 JANNAF Safety and Environmental Protection Subcommittee Workshop on Environmentally Sound Processing Technology, (Chemical Propulsion Information Agency, Columbia, MD, 1998).

120.  G.D. Davis, L.A. Krebs, and C.M. Dacres, “In-Situ Sensor to Detect Moisture Intrusion and Degradation of Coatings, Composites, and Adhesive Bonds,” in Proc. 1^st World Congress on Adhesion and Related Phenomena (DECHEMA eV, Frankfurt, Germany, 1998), p. 2.21.

121.  G.D. Davis, L.A. Krebs, C.M. Dacres, J.P. Bell, and C.Y. Wu, “Cyclic Corrosion Testing of Spontaneous Polymerized Coatings Using an In-Situ Corrosion Sensor,” in Proc. 22^nd Annual Meeting Adhes. Soc., D.R. Speth, ed., (Adhesion Society, Blacksburg, VA, 1999), p. 354.

122.  G.D. Davis, L.A. Krebs, L.T. Drzal, M.J. Rich, and P. Askeland, “Electrochemical Sensors for Nondestructive Evaluation of Adhesive Bonds,” J. Adhes. 72, 335 (2000).

123.  G.D. Davis, C.M. Dacres, and L.A. Krebs, “In-Situ Corrosion Sensor for Coating Testing and Screening,” Materials Performance 39(2), 46 (2000).

124.  G.D. Davis, L.A. Krebs, and C.M. Dacres, “Detection of Moisture in Composites Using an Electrochemical Impedance Spectroscopy Sensor,” Proc. 3^rd Joint FAA/DOD/NASA Conference on Aging Aircraft (Albuquerque, NM, 1999).

125.  G.D. Davis, C.M. Dacres, and L.A. Krebs. “In-Situ Sensor to Detect Moisture Intrusion and Degradation of Coatings, Composites, and Adhesive Bonds,” Proc. 1999 Tri-Services Conference on Corrosion (Myrtle Beach, SC, 1999).

126.  G.D. Davis, C.M. Dacres, and L.A. Krebs, “EIS-Based In-Situ Sensor for the Early Detection of Coating Degradation and Substrate Corrosion,” Corrosion2000, Paper 275 (NACE, Houston, TX, 2000).

127.  T.F. Davidson, E.M. Williams, R. Zatorski, and G.D. Davis, “Bondable Stainless Surface (BOSS) Coatings Technology Demonstration,” Proc. 49^th JANNAF Propulsion Meeting (Chemical Propulsion Information Agency, Columbia, MD, 1999).

128.  G.D. Davis, L.A. Krebs, L.T. Drzal, M.J. Rich, and P. Askeland, “The Use of Electrochemical Impedance Spectroscopy to Detect Moisture Intrusion into Adhesive Bonds,” in Proc. 23^rd Annual Meeting Adhes. Soc., G.L. Anderson, ed., (Adhesion Society, Blacksburg, VA, 2000), p. 317.

129.  A.P.S. Tihaiya, J.P. Bell, G.D. Davis, and T.R. Hanlon, “Pretreatment Studies on Aluminum Alloys for a Coating Process,” in Proc. 23^rd Annual Meeting Adhes. Soc., G.L. Anderson, ed., (Adhesion Society, Blacksburg, VA, 2000), p. 441.

130.  G.D. Davis, "Durability of Adhesive Joints," Handbook of Adhesive Technology, 2^nd ed., A. Pizzi and K.L. Mittal, eds., (Marcel Dekker, New York, 2003), p. 273.

131.  G.D. Davis, L.A. Krebs, and C.M. Dacres, “Use of an In-Situ Corrosion Sensor to Detect Degradation of Adhesive Bonds,” Proc. 4^th Inter. Aircraft Corrosion Workshop, (Solomons Island, MD, 2000).

132.  L.A. Krebs, G.D. Davis, and C.M. Dacres, “Monitoring Moisture Intrusion and Coating Degradation in the Field,” Corrosion2001, Paper 1430 (NACE, Houston, TX, 2001).

133.  G.D. Davis, J. A. von Fraunhofer, L.A. Krebs, C.M. Dacres, “The Use of Tobacco Extracts as Corrosion Inhibitors,” Corrosion2001, Paper 1558 (NACE, Houston, TX, 2001).

134.  G.D. Davis and J.D. Venables, “Surface Treatments of Metal Adherends,” in Adhesion Science and Engineering, Volume 2:  Surfaces, Chemistry, and Application, A.V. Pocius and M.K. Chaudhury, eds., (Elsevier, New York, 2002), p. 947.

135.  G.D. Davis, L.A. Krebs, and C.M. Dacres, “Sensor to Detect Moisture/Degradation of Composites and Adhesive Bonds,” Proc. 46^th Inter. SAMPE Symp. (SAMPE, Covina, CA 2001), p. 20; also COMPOSITES IN MANUFACTURING  (Third Quarter 2002).

136.  G.D. Davis, L.A. Krebs, and C.M. Dacres, “Detecting Degradation of Adhesive Bonds With an In-Situ Corrosion Sensor,” in Proc. 24^th Annual Meeting Adhes. Soc., J.A. Emerson, ed., (Adhesion Society, Blacksburg, VA, 2001), p. 77.

137.  H. Zheng, J.P. Bell, and G.D. Davis, “Effects of Polymer Composition on the Properties of Fluorinated Coatings,” in Proc. 24^th Annual Meeting Adhes. Soc., J.A. Emerson, ed., (Adhesion Society, Blacksburg, VA, 2001), p. 468.

138.  H. Zheng, G.D. Davis, and J.P. Bell, “Formation and properties of spontaneously polymerized fluorocoatings on aluminum,” Polym. Eng. Sci. 41, 1970 (2001).

139.  G.D. Davis, “Metal Pretreatments for Adhesive Bonding,” in Organic Coating of Metals:  Paints, Lacquers, and Adhesives, G.W. Critchlow, ed., (Wiley, Chichester, in press).

140.  G.D. Davis, “Combining Electrochemical and XPS Measurements for the Complete Picture” in State-of-the-Art Application of Surface and Interface Analysis Methods to Environmental Material Interactions: In Honor of James E. Castle's 65th Year ,, D.R. Baer, C.R. Clayton, G.D. Davis, and G.P. Halada, eds., Proceedings Volume 2001-5, (Electrochemical Society, Pennington, NJ, 2002), p. 91.

141.  A.P.S. Tihaiya, J.P. Bell, G.D. Davis, and T.R. Hanlon, “The Residue (Smut) Formed on Aluminum Alloys During Hydrofluoric Acid Etching and its Effect on a Coating Process,” Adhesion Aspects of Polymeric Coatings, Vol. 2, K.L. Mittal, ed., (VSP, Boston, 2003), p. 65.

142.  G.D. Davis, L.A. Krebs, and C.M. Dacres,  “Detection of Moisture in Composites and Adhesive Bonds Using an Electrochemical Impedance Sensor,” Proc. 8^th Internat. Conf. Composites Engineering (Tenerife, Spain, 2001), p. 175.

143.  G.D. Davis, “National Capital Section,” The Electrochemical Society 1902-2002:  A Centennial History (The Electrochemical Society, Pennington, NJ, 2002), p. 146.

144.  G.D. Davis, L.A. Krebs, and C.M. Dacres, “Coating Evaluation and Validation of Accelerated Test Conditions Using an In-Situ Corrosion Sensor,” J. Coatings Technol. 74(935), 69 (December 2002).

145.  G.D. Davis, K. Thayer, M.J. Rich, and L.T. Drzal, “Inspection of Composite and Metal Adhesive Bonds with an Electrochemical Sensor,” J. Adhes. Sci. Technol. 16, 1307 (2002).

146.  G.D. Davis and B.J. Harkless, “Use of an In-Situ Electrochemical Sensor for Predictive Assessment of Bonded Repair,” Inter. J. Adhes. Adhes. 22, 323 (2002).

147.  D. R. Baer, C. R. Clayton, G. D. Davis, and G. P. Halada, ed., State-of-the-Art Application of Surface and Interface Analysis Methods to Environmental Material Interactions: In Honor of James E. Castle's 65th Year, PV 2001-5, (Electrochemical  Society, Pennington, NJ, 2002).

148.  E.L. Principe, B.A. Shaw, and G.D. Davis, “The Role of the Oxide-Metal Interface in Corrosion Resistance:  The Al-W and Al-Mo Systems,” Corrosion 59, 295 (2003).

149.  G.D. Davis, C.M. Dacres, and L.A. Krebs, “Electrochemical Techniques,” Corrosion:  ASM Handbook 13A, (ASM International, Metals Park, OH, 2003), p. 509.

150.  G.D. Davis, “Detection of Moisture in Adhesive Bonds Using Electrochemical Impedance Spectroscopy,” Proc. 34^th Internat. SAMPE Tech. Conf. (SAMPE, Covina, CA, 2002), p. 1086.

151.  G.D. Davis and B.J. Harkless, “Predictive Assessment of Bonded Repair Using an In-Situ Electrochemical Impedance Sensor,” Proc. 5^th Internat. Aircraft Corrosion Workshop (Solomons Island, MD, 2002).

152.  G.D. Davis, M. J. Rich, R.S. Harichandran, L. T. Drzal, T. Mase, and A. Al-Ostaz, “Development of an Electrochemical Impedance Sensor to Monitor Delamination and Moisture Uptake in CFRP-Reinforced Concrete Structures,” Proc. 82^nd Transportation Research Board Annual Meeting, Paper 03-2392.

153.  G.D. Davis and J.A. von Fraunhofer, “Tobacco Plant Extracts as Environmentally Benign Corrosion Inhibitors,” Materials Performance 42(2), 56 (February 2003).

154.  R.A. Zatorski and G.D. Davis, “Thermal Spray Processes,”Handbook of Adhesion, 2^nd Edition, D.E. Packham, ed., (Wiley, Chichester, 2005), p. 542.

155.  G.D. Davis and R.A. Zatorski, “Thermal Spray Coatings Used for Adhesion,” Handbook of Adhesion, 2^nd Edition, D.E. Packham, ed., (Wiley, Chichester, 2005), p. 541.

156.  G.D. Davis and C.M. Dacres, “Use of Embedded Corrosion Sensors and Sensor Blankets to Detect Paint Degradation,” Corrosion2003, Paper 3441 (NACE, Houston, TX, 2003).

157.  G.D. Davis, M. J. Rich, and L. T. Drzal, “Detecting Delamination and Moisture Intrusion of Graphite/Epoxy-Concrete Structures Using Electrochemical Impedance Sensors,” Proc. 26^th Annual Meeting Adhes. Soc., J.T. Koberstein and G.L. Anderson, ed., (Adhesion Society, Blacksburg, VA, 2003) p. 139.

158.  C.Y. Wu, J.P. Bell, and G.D. Davis, “Enhancement of Corrosion Resistance of Protective Coatings Formed by Spontaneous Surface Polymerization,” Inter. J. Adhes. Adhes. 23, 499 (2003).

159.  G.D. Davis, M.J. Rich, L.T. Drzal, and R.S. Harichandran, “Use of an Electrochemical Impedance Sensor to Monitor Delamination and Moisture Uptake in CFRP-Reinforced Concrete Structures,” Proc. 14^th Inter. Conf. Composite Materials, (Society of Manufacturing Engineers, Dearborn, MI, 2003).

160.  J.A. von Fraunhofer and G.D. Davis, “Tobacco Extracts as Pickling Inhibitors,” Mater. Performance 42(12) 38 (2003).

161.  G.D. Davis, M.J. Rich, and L.T. Drzal, “Monitoring Moisture Uptake and Delamination in CFRP-Reinforced Concrete Structures with Electrochemical Impedance Sensors,” J. Nondestructive Evaluation 23, 1 (2004).

162.  S. Mani, M.J. Rich, L.T. Drzal, and G.D. Davis, “The Application Of Electrochemical Impedance Spectroscopy For Non-Destructive Evaluation Of Composite Bonded Structures,” Proc. American Soc. Composites, 18^th Annual Technical Conf. (American Society for Composites, Dayton, OH, 2003).

167.  R.S. Harichandran, S. Hong, A. Al-Ostaz, and G.D. Davis, "EIS-based NDE of bond integrity in concrete bridges strengthened with CFRP," Proc. 1st International Conference on Structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan, (2003).

168.  G.D. Davis and R.S. Zatorski, “Thermal Sprayed Polymeric Coatings for Corrosion Protection and Impact Resistance of Landing Gear,” Proc. 6th Inter. Aircraft Corrosion Workshop, (Solomons Island, MD, 2004).

169.  G.D. Davis, S. Mani, M.J. Rich, and L.T. Drzal, “Electrochemical Impedance Spectroscopy Inspection of Composite Adhesive Bonds,” J. Adhes. Sci. Technol. 19, 467 (2005).

170.  G.D. Davis, S. Mani, M.J. Rich, and L.T. Drzal, “Using Electrochemical Impedance Spectroscopy for Health Monitoring of Composite-Composite and Aluminum-Composite Bonds,” Proc. 28th Annual Meeting Adhes. Soc., K. Vorvolakos, ed., (Adhesion Society, Blacksburg, VA, 2005), p. 348.

171.  G.D. Davis, T.G. Vargo, A.W. Dalgleish, and D. Deason, “Corrosion Protection and Health Monitoring by Smart Appliqués,” Corrosion2005, Paper 05205 (NACE, Houston, TX, 2005).

172.  G.D. Davis, “Electrochemical Impedance Evaluation of Boron-Epoxy/Aluminum Bonds,” J. Adhes. Sci. Technol. 19, 1397 (2005).

173.  G.D. Davis, F. Garra, S. Raghu, R. Srinivasan, B.G. Carkhuff, and T.E. Phillips, “Corrosion Health Monitor for Ground Vehicles” Proc. 2005 Tri-Services Conference on Corrosion (Orlando, FL).

174.  R. Srinivasan, B.G. Carkhuff, T.E. Phillips, H. Saffarian, G.D. Davis, and S. Raghu, “Miniature Wireless Full Spectrum EIS Corrosion Sensor” Proc. 2005 Tri-Services Conference on Corrosion (Orlando, FL).

175.  G.D. Davis, F. Garra, T.G. Vargo, A.W. Dalgleish, D. Deason, and Roger D. Schwerman, “Corrosion Protection with Appliqués -- Comparison of Laboratory and Hawaii Exposures,” Corrosion2006, Paper 06249 (NACE, Houston, TX, 2006).

176.  G.D. Davis and J.G. Dillard, “Sealant Evaluation Using Electrochemical Impedance Spectroscopy,” Proc. 29th Annual Meeting Adhes. Soc., (Adhesion Society, Blacksburg, VA, 2006), p. 338.

177.  G.D. Davis and J.G. Dillard, “Development of an Electrochemical Impedance Spectroscopy Sealant Test:  I. Nonconductive Sealants, J. Adhes. Sci. Technol. 20, 1215 (2006).

178.  G.D. Davis and J.G. Dillard, “Development of an Electrochemical Impedance Spectroscopy Sealant Test:  II. Conductive Sealants, J. Adhes. Sci. Technol. 20, 1235 (2006).

179.  G.D. Davis, “Electrochemical Impedance Spectroscopy in Sealant Testing,” in Handbook of Sealants Technology, A. Pizzi and K.L. Mittal, eds., (Marcel Dekker, New York), in press.

180.  G.D. Davis, R.A. Ross, and S. Raghu, “Coating Health Monitoring System for Army Ground Vehicles,” Corrosion2007, Paper 07230 (NACE, Houston, TX, 2007).

181.  G.D. Davis, “History of the Adhesion Society:  1977 – 2007,” (The Adhesion Society, Blacksburg, VA, 2007).

182.  G.D. Davis, T.G. Vargo, and D.M. Deason, “Corrosion Protection and Health Monitoring Using Smart Appliqués,” Proc. SAMPE ’07 (SAMPE, Covina, CA, 2007).

183.  G.D. Davis, T.G. Vargo, and D.M. Deason, “Corrosion Protection Using Appliqués in a Tropical Coastal Environment,” Materials Performance 46(6) 38 (2007).  

PATENTS

1.        U.S. Patent 5,205,922,  “Formation of Pitting Resistant Anodized Films on Aluminum,” J.S. Ahearn, G.D. Davis, and W.C. Moshier, April 27, 1993.

2.        U.S. Patent 5,859,537,  "Electrochemical Sensors for Evaluating Corrosion and Adhesion on Painted Metal Structures," G.D. Davis and C.M. Dacres, January 12, 1999.

3.        U.S. Patent 6,054,038,  “Portable Hand-Held In-Situ Electrochemical Sensor for Evaluating Corrosion and Adhesion on coated and Uncoated Metal Substrates,” G.D. Davis and C.M. Dacres, April 25, 2000.

4.        U.S. Patent 6,313,646,  “In-Situ Electrochemical-Based Moisture Sensor for Detecting Moisture in Composite and Bonded Structures,” G.D. Davis and C.M. Dacres, November 6, 2001.

5.        U.S. Patent 6,328,878,  “An Adhesive Tape Sensor for Detecting and Evaluating Coating and Substrate Degradation Utilizing Electrochemical Processes,” G.D. Davis, C.M. Dacres, and L.A. Krebs, December 11, 2001.